ABS and traction systems · RaceTCS · Motorsport overview
RaceTCS V3 is a standalone wheel-speed traction and RPM controller. Its manual describes both fuel-injector and ignition-coil intervention modes; the system does not provide hydraulic ABS. RaceTCS V3 manual, pp. 3–5.
Functions and limits
The V3 manual documents wheel-slip and RPM limiting, configured launch/flat-shift logic, and ignition retard in the appropriate mode. It states that fuel-cut mode is not supported on direct-injection engines; the spark mode has separate coil-signal requirements. It warns that ignition cut or retard can increase exhaust temperature. Do not infer suitability for an engine or ignition setup without checking all requirements in the V3 manual.
The manufacturer lists V3 with a device, connector/loom, preset selector and indicator, although kit contents can change. It designates V3 for motorsport use only. Confirm vehicle wiring, calibration, competition rules and the current supplied kit. RaceTCS product and downloads.