Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
ATE, Continental

Changes from revision 1 to revision 3

Removed text is struck through; added text is highlighted.

ABS and traction systems · ATE, Teves and Continental manufacturer directory

System identification

ATE says the integrated ABS MK II reached series production in 1984 and was used by Ford USA and Ford Europe. Continental identifies MK II as Teves' production microprocessor-controlled passenger-car ABS.

Documented examples and configuration

This is a historical Teves family name. The next MK IV is a distinct design: ITT-Teves authors describe MK IV as an add-on system with vacuum-boosted actuation, contrasting its layout with MK II.

Identification and service limits

A historical family name alone does not specify a car's hydraulic layout, controller or service procedure. Confirm the installed components and use vehicle-specific workshop information.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Early production applicationsContinental identifies the Lincoln Continental in North America and the Ford Scorpio in Europe as early MK II applications. Continental states that the Scorpio received ABS as standard equipment; confirm the individual vehicle and its build specification before assuming its components are interchangeable. The manufacturer describes the MK II as integrating brake actuation, power assistance, hydraulic control and ABS in a compact unit; traction control was added later. Continental ABS history and early applications.

Sources

ATE company historyContinental ABS anniversaryITT-Teves MK IV paper

Page organisation changed

FieldRevision 1Revision 3
Page typeTechnical articleReference hub
SubjectABS / DSCABS / DSC
ParentSection levelATE, Teves and Continental ABS systems
Applies toNo ECU-specific applicabilityNo ECU-specific applicability
Tool groupsNoneNone
Vehicle makesATE, ContinentalATE, Continental

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: ATE Teves ABS MK II

ABS and traction systems · ATE, Teves and Continental manufacturer directory

System identification

ATE says the integrated ABS MK II reached series production in 1984 and was used by Ford USA and Ford Europe. Continental identifies MK II as Teves' production microprocessor-controlled passenger-car ABS.

Documented examples and configuration

This is a historical Teves family name. The next MK IV is a distinct design: ITT-Teves authors describe MK IV as an add-on system with vacuum-boosted actuation, contrasting its layout with MK II.

Identification and service limits

A historical family name alone does not specify a car's hydraulic layout, controller or service procedure. Confirm the installed components and use vehicle-specific workshop information.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Sources

Revision 3: ATE Teves ABS MK II

ABS and traction systems · ATE, Teves and Continental manufacturer directory

System identification

ATE says the integrated ABS MK II reached series production in 1984 and was used by Ford USA and Ford Europe. Continental identifies MK II as Teves' production microprocessor-controlled passenger-car ABS.

Documented examples and configuration

This is a historical Teves family name. The next MK IV is a distinct design: ITT-Teves authors describe MK IV as an add-on system with vacuum-boosted actuation, contrasting its layout with MK II.

Identification and service limits

A historical family name alone does not specify a car's hydraulic layout, controller or service procedure. Confirm the installed components and use vehicle-specific workshop information.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Early production applications

Continental identifies the Lincoln Continental in North America and the Ford Scorpio in Europe as early MK II applications. Continental states that the Scorpio received ABS as standard equipment; confirm the individual vehicle and its build specification before assuming its components are interchangeable. The manufacturer describes the MK II as integrating brake actuation, power assistance, hydraulic control and ABS in a compact unit; traction control was added later. Continental ABS history and early applications.

Sources