Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch

Changes from revision 1 to revision 3

Removed text is struck through; added text is highlighted.

ABS and traction systems · Bosch manufacturer directory

System identification

Bosch describes ABS 2, unveiled in 1978, as its first production-ready electronically controlled ABS. The hydraulic modulator and control unit are distinct components in Bosch's historical illustration.

Documented examples and configuration

Snap-on's VW/Audi diagnostic manual lists BOSCH II ABS on selected 1988–92 Audi 90/90 Quattro, 1992–94 Audi 80 and other period applications. For some later listed models it indicates fault-code access via an auxiliary relay station; diagnostic access differs by exact vehicle and year.

Identification and service limits

Historical ABS 2/II references do not establish that every later 2-series suffix, module, diagnostic connector or vehicle is identical. Confirm the specific equipment before using service data.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Photographs1978 Bosch ABS 2 electronic control unit and hydraulic modulator. Photograph by Robert Bosch GmbH, Wikimedia Commons, CC0.Bosch ABS-2 controller at the Computer History Museum. Photograph by Tomwsulcer, Wikimedia Commons, CC0.

Sources

Bosch ABS historySnap-on VW/Audi manual, ABS table

Page organisation changed

FieldRevision 1Revision 3
Page typeTechnical articleReference hub
SubjectABS / DSCABS / DSC
ParentSection levelBosch ABS, traction and ESP systems
Applies toNo ECU-specific applicabilityNo ECU-specific applicability
Tool groupsNoneNone
Vehicle makesBoschBosch

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Bosch ABS 2

ABS and traction systems · Bosch manufacturer directory

System identification

Bosch describes ABS 2, unveiled in 1978, as its first production-ready electronically controlled ABS. The hydraulic modulator and control unit are distinct components in Bosch's historical illustration.

Documented examples and configuration

Snap-on's VW/Audi diagnostic manual lists BOSCH II ABS on selected 1988–92 Audi 90/90 Quattro, 1992–94 Audi 80 and other period applications. For some later listed models it indicates fault-code access via an auxiliary relay station; diagnostic access differs by exact vehicle and year.

Identification and service limits

Historical ABS 2/II references do not establish that every later 2-series suffix, module, diagnostic connector or vehicle is identical. Confirm the specific equipment before using service data.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Sources

Revision 3: Bosch ABS 2

ABS and traction systems · Bosch manufacturer directory

System identification

Bosch describes ABS 2, unveiled in 1978, as its first production-ready electronically controlled ABS. The hydraulic modulator and control unit are distinct components in Bosch's historical illustration.

Documented examples and configuration

Snap-on's VW/Audi diagnostic manual lists BOSCH II ABS on selected 1988–92 Audi 90/90 Quattro, 1992–94 Audi 80 and other period applications. For some later listed models it indicates fault-code access via an auxiliary relay station; diagnostic access differs by exact vehicle and year.

Identification and service limits

Historical ABS 2/II references do not establish that every later 2-series suffix, module, diagnostic connector or vehicle is identical. Confirm the specific equipment before using service data.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Photographs

Early Bosch ABS 2 electronic control unit beside hydraulic modulator
1978 Bosch ABS 2 electronic control unit and hydraulic modulator. Photograph by Robert Bosch GmbH, Wikimedia Commons, CC0.
Bosch ABS 2 controller electronics on display at the Computer History Museum
Bosch ABS-2 controller at the Computer History Museum. Photograph by Tomwsulcer, Wikimedia Commons, CC0.

Sources