Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch

ABS and traction systems · Bosch manufacturer directory

System identification

Bosch describes ABS 2, unveiled in 1978, as its first production-ready electronically controlled ABS. The hydraulic modulator and control unit are distinct components in Bosch's historical illustration.

Documented examples and configuration

Snap-on's VW/Audi diagnostic manual lists BOSCH II ABS on selected 1988–92 Audi 90/90 Quattro, 1992–94 Audi 80 and other period applications. For some later listed models it indicates fault-code access via an auxiliary relay station; diagnostic access differs by exact vehicle and year.

Identification and service limits

Historical ABS 2/II references do not establish that every later 2-series suffix, module, diagnostic connector or vehicle is identical. Confirm the specific equipment before using service data.

Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.

Sources