
Haltech Nexus R3 is a programmable vehicle control unit with engine management in Haltech's Nexus family. VCU incorporating power distribution, onboard inertial sensor and four high-current 25 A outputs. Its eight injector channels are peak-and-hold outputs. Haltech universal comparison.
Identification and I/O
| Item | Manufacturer comparison |
|---|---|
| Injector channels | 8, peak-and-hold |
| Ignition channels | 8 |
| Digital pulsed outputs | 6 |
| MAP sensor | 4 bar internal |
| Tuning software | Nexus Software Programmer (NSP); verify installed firmware |
Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.
Pinout and wiring
Use the manufacturer wiring diagrams and select the Nexus R3 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.
Software and further information
Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.