Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Nissan R34 GTT is a V Series plug-in ECU documented for Nissan R34 Skyline GTT. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline R34 GTS. It lists Aux 1 at pins 104/106 and Aux 5 at pins 107/111; confirm the precise vehicle application and loom.

Main ECU connector: documented positions

PositionECU function101Injector 121DI 3103Injector 323An Volt 4104Aux 126DI 1105Injector 229DI 4106Aux 144/45Trig 2107Aux 546Trig 1110Injector 547An Volt 3111Aux 550An Volt 2112Injector 654An Volt 1114Injector 456An Temp 1117Aux 662Knock 2118Aux 763Knock 1124Ground72+14V (Main Relay)1Ignition 12Ignition 53Ignition 35Aux 37Ignition 68Ignition 29Ignition 411Aux 413Aux 214Aux – Inj 717Aux 820DI 2

Other connections

PositionECU functionExpansion 1Signal GroundExpansion 2+5V OutExpansion 3DI 5Expansion 4DI 6Expansion 5An Volt 5Expansion 6An Volt 6Expansion 7An Temp 2Expansion 8An Temp 3

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Vi-PEC V Series Nissan R34 GTT

Vi-PEC V Series Nissan R34 GTT is a V Series plug-in ECU documented for Nissan R34 Skyline GTT. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline R34 GTS. It lists Aux 1 at pins 104/106 and Aux 5 at pins 107/111; confirm the precise vehicle application and loom.

Main ECU connector: documented positions

PositionECU function
101Injector 1
21DI 3
103Injector 3
23An Volt 4
104Aux 1
26DI 1
105Injector 2
29DI 4
106Aux 1
44/45Trig 2
107Aux 5
46Trig 1
110Injector 5
47An Volt 3
111Aux 5
50An Volt 2
112Injector 6
54An Volt 1
114Injector 4
56An Temp 1
117Aux 6
62Knock 2
118Aux 7
63Knock 1
124Ground
72+14V (Main Relay)
1Ignition 1
2Ignition 5
3Ignition 3
5Aux 3
7Ignition 6
8Ignition 2
9Ignition 4
11Aux 4
13Aux 2
14Aux – Inj 7
17Aux 8
20DI 2

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3DI 5
Expansion 4DI 6
Expansion 5An Volt 5
Expansion 6An Volt 6
Expansion 7An Temp 2
Expansion 8An Temp 3
Revision 3: Vi-PEC V Series Nissan R34 GTT
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Nissan R34 GTT is a V Series plug-in ECU documented for Nissan R34 Skyline GTT. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline R34 GTS. It lists Aux 1 at pins 104/106 and Aux 5 at pins 107/111; confirm the precise vehicle application and loom.

Main ECU connector: documented positions

PositionECU function
101Injector 1
21DI 3
103Injector 3
23An Volt 4
104Aux 1
26DI 1
105Injector 2
29DI 4
106Aux 1
44/45Trig 2
107Aux 5
46Trig 1
110Injector 5
47An Volt 3
111Aux 5
50An Volt 2
112Injector 6
54An Volt 1
114Injector 4
56An Temp 1
117Aux 6
62Knock 2
118Aux 7
63Knock 1
124Ground
72+14V (Main Relay)
1Ignition 1
2Ignition 5
3Ignition 3
5Aux 3
7Ignition 6
8Ignition 2
9Ignition 4
11Aux 4
13Aux 2
14Aux – Inj 7
17Aux 8
20DI 2

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3DI 5
Expansion 4DI 6
Expansion 5An Volt 5
Expansion 6An Volt 6
Expansion 7An Temp 2
Expansion 8An Temp 3