Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Vi-PEC V Series Nissan R34 GTT is a V Series plug-in ECU documented for Nissan R34 Skyline GTT. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list all factory connector cavities; omitted positions are not assumed unused. The guide labels this Skyline R34 GTS. It lists Aux 1 at pins 104/106 and Aux 5 at pins 107/111; confirm the precise vehicle application and loom.

Main ECU connector: documented positions

PositionECU function
101Injector 1
21DI 3
103Injector 3
23An Volt 4
104Aux 1
26DI 1
105Injector 2
29DI 4
106Aux 1
44/45Trig 2
107Aux 5
46Trig 1
110Injector 5
47An Volt 3
111Aux 5
50An Volt 2
112Injector 6
54An Volt 1
114Injector 4
56An Temp 1
117Aux 6
62Knock 2
118Aux 7
63Knock 1
124Ground
72+14V (Main Relay)
1Ignition 1
2Ignition 5
3Ignition 3
5Aux 3
7Ignition 6
8Ignition 2
9Ignition 4
11Aux 4
13Aux 2
14Aux – Inj 7
17Aux 8
20DI 2

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3DI 5
Expansion 4DI 6
Expansion 5An Volt 5
Expansion 6An Volt 6
Expansion 7An Temp 2
Expansion 8An Temp 3