Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Vi-PEC V Series Mitsubishi EVO 9 is a V Series plug-in ECU documented for Mitsubishi Lancer EVO 9. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 22, are shown below. The drawing uses a view looking into the ECU from the wire side. Positions omitted by the source are not assumed unused; configure the channels for the vehicle. The guide repeats Aux–Ign 4 at pins 30 and 31 and Aux 3 at pins 41 and 63; verify the loom and configuration.

Main ECU connector: documented positions

PositionECU function
1Injection 1
56Aux – Inj 7
2Injection 4
57Aux – Inj 8
3Aux – Ign 5
61An Volt 2
4Aux – Ign 6
62An Temp 3
6Aux – Ign 7
63Aux 3
9Injection 2
66DI 2
11Ignition Cyls 1 and 4
67DI 7
12Ignition Cyls 2 and 3
68DI 5
14Aux 8
71An Volt 4
15Aux 5
78An Volt 3
18Aux 1
80DI 3
20Aux – Inj 5
83DI 4
21Aux – Ign 3
88DI 8
22Aux – Inj 6
90Aux – Ign 8
24Injection 3
91Knock 1
28Aux 7
92An Volt 1
47+14V Main Relay
96An Temp 2
29Aux 6
99DI 6
30Aux – Ign 4
46Ground
31Aux – Ign 4
32Aux 2
41Aux 3
43Trig 1
44An Temp 1
50Trig 2
53DI 1
54An Volt 5
55Aux 4

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3DI 9
Expansion 4DI 10
Expansion 5An Volt 6
Expansion 6An Volt 7
Expansion 7An Volt 8
Expansion 8An Temp 4