Modern fuel-injected motorcycles use a 500 kbit/s 11-bit CAN bus linking the Engine ECU, ABS/IMU, TFT instrument cluster, and electronic suspension. Unlike passenger cars with a standardised 16-pin J1962 connector, motorcycles use manufacturer diagnostic connectors (such as the round 10-pin / Euro 5 6-pin red Sumitomo connector on BMW, 4-pin DDA / Euro 5 on Ducati, and 6-pin Euro 5 on KTM) and in some cases do not expose live powertrain broadcast frames at the diagnostic plug without tapping the bike's main CAN pair.
BMW Motorrad (S1000RR, 2012–2018+) CAN IDs (500 kbit/s)
Compiled from Racelogic VBOX S1000RR documentation and community RaceCapture/2D logger decodes (500 kbit/s; direct tap required on models where OBD plug does not expose live CAN).
| Hex ID | Decimal | Signals & Community-Observed Byte Layout |
|---|---|---|
0x10C | 268 | Engine RPM & Throttle/Grip Position: Byte 2 throttle / grip; Bytes 2–3 (16-bit, ×5 or ×0.25 depending on model year / byte alignment) Engine RPM — verify scaling against live tacho on target model year |
0x2A0 | 672 | Lean angle (IMU / sensor cluster) |
0x2BC | 700 | Engaged gear & coolant (water) temperature |
0x3FF | 1023 | Odometer |
Ducati CAN IDs
Compiled from community Ducati CAN bus reverse engineering (RaceChrono CAN mappings; byte indices 0-based).
| Hex ID | Decimal | Signals & Byte Layout |
|---|---|---|
0x020 | 32 | Engine temperature (Byte 1) |
0x080 | 128 | Vehicle speed (Bytes 1–2), Engine RPM (Bytes 3–4), Throttle position (Byte 5) |
0x300 | 768 | Odometer / mileage (Bytes 3–4) |
KTM (690 Enduro R, 1290 / 1390 Super Duke) CAN IDs
Compiled from blalor/ktm-can (2020 690 Enduro R / 1290 Super Duke) and sruon/ktm-1390-can (2024+ 1390 Super Duke R EVO via Euro 5 adapter). Byte indices 0-based.
| Hex ID | Decimal | Cycle | Signals & Byte Layout |
|---|---|---|---|
0x120 | 288 | 20 ms | Engine RPM (Bytes 0–1), Throttle position (Byte 2), Kill switch (Byte 3 bit 4) & throttle map |
0x128 / 0x129 | 296 / 297 | 20 ms | Gear & Clutch: 0x128 (1390) Byte 0 bits 0–4 gear, bit 5 clutch disengaged; 0x129 (690) gear & clutch switch |
0x12A | 298 | 50 ms | Anti-wheelie mode (Byte 2 bits 0–3), traction slip adjuster (Byte 3), requested throttle map |
0x12B | 299 | 10 ms | Front wheel speed, rear wheel speed, lean & tilt angles (690 Enduro R) |
0x140 | 320 | — | Handlebar switchgear (1390): Byte 0 turn signals & C1/C2; Byte 1 cruise/horn/high beam; Byte 2 D-pad |
0x290 | 656 | 10 ms | Brake pressure & switches: Bytes 0–1 front brake pressure; Byte 3 bit 4 front brake, bit 5 rear brake (1390) |
0x450 | 1104 | 50 ms | Traction control button (690) |
0x540 | 1344 | 100 ms | Engine RPM, gear, side-stand switch, coolant temperature (690) |
0x5D1 | 1489 | — | Semi-active suspension profile & preload (1390 EVO) |
Sources
- Racelogic Vehicle CAN Database — BMW S1000RR and S1000RR Forum CAN ID Decoding (0x10C, 0x2A0, 0x2BC, 0x3FF). Accessed 2026-11-17.
- Fatom2k/DucatiCanBus. Accessed 2026-11-17.
- blalor/ktm-can (690 Enduro R / 1290) and sruon/ktm-1390-can (1390 Super Duke R EVO). Accessed 2026-11-17.