Jaguar and Land Rover (JLR) vehicles built from the mid-2000s through the pre-DoIP era (including Jaguar XF X250, XJ X351, XK X150, F-Type, and Land Rover Freelander 2, Discovery 4, Range Rover Evoque L538, L405, and Range Rover Sport L494) use a dual-bus CAN topology bridged by the Instrument Cluster (IPC) or Central Junction Box / Gateway:
- HS-CAN (High-Speed Powertrain CAN): 500 kbit/s on OBD-II pins 6 and 14 (and cluster connector
C2MC01Apins 1/2 on XF X250) — connects ECM, TCM, ABS/DSC, Steering Angle / EPS, and RCM. - MS-CAN (Medium-Speed Body CAN): 125 kbit/s (on XF X250 cluster
C2MC01Apins 4/5) — connects BCM/CJB, climate control, fuel sender, gear selector, and interior modules. Note that on 2017+ DoIP JLR platforms, diagnostics transition to Diagnostics over IP (DoIP) via gateway tunneling.
Jaguar XF X250 (2008–2015) HS-CAN & MS-CAN IDs
Compiled from reverse-engineered Jaguar XF X250 (2012+ facelift & earlier) instrument-cluster CAN logs. Byte indices are 0-based.
| Hex ID | Decimal | Bus | Name / Function | Bytes & Decoding Formula |
|---|---|---|---|---|
0x028 | 40 | MS-CAN (125k) | Gear selector (MS) | Byte 4 bitmask |
0x068 | 104 | MS-CAN (125k) | Fuel level | Bytes 3–4 (Intel LE uint16, bench-calibrated) |
0x088 | 136 | MS-CAN (125k) | HS wake trigger | Byte 3 = 0x06 (required on MS-CAN to wake IPC) |
0x208 | 520 | MS-CAN (125k) | Climate control | Status bitfield |
0x2A8 | 680 | MS-CAN (125k) | BCM settings | Bidirectional configuration bitfield |
0x513 | 1299 | MS-CAN (125k) | Fuel display enable | Required for cluster fuel gauge needle activation |
0x20B | 523 | HS-CAN (500k) | Vehicle / wheel speeds (ABS) | Bytes 6–7: vehicle speed (mph ≈ raw × 0.006431 + 1.20) |
0x24B | 587 | HS-CAN (500k) | Front wheel speeds & yaw | ABS front wheel speeds + yaw rate (unscaled) |
0x280 | 640 | HS-CAN (500k) | Steering angle | Steering wheel angle sensor |
0x294 | 660 | HS-CAN (500k) | Rear wheel speeds & lat accel | ABS rear wheel speeds + lateral acceleration |
0x295 | 661 | HS-CAN (500k) | Engine RPM (ECM) | Bytes 6–7 (BE): raw & 0x1FFF = RPM (top 3 bits masked) |
0x2B5 | 693 | HS-CAN (500k) | Throttle position | Throttle angle (%) |
0x315 | 789 | HS-CAN (500k) | Ambient air temp | Outside air temperature |
0x353 | 851 | HS-CAN (500k) | Gear selector (HS) | Selector signal |
0x3D3 | 979 | HS-CAN (500k) | Transmission oil temp | Byte 4 (LE): raw − 40 °C |
0x3F3 | 1011 | HS-CAN (500k) | Gear position (TCM) | Engaged gear, manual/sport modes |
0x4D5 | 1237 | HS-CAN (500k) | Engine coolant temp (ECM) | Byte 6: raw − 60 °C |
Sources
- fsfarmscaper/jaguar-xf-x250-can — Jaguar XF X250 CAN Database. Accessed 2026-11-17.
- Jaguar Training Guide 688-JAG — Advanced Electrical Systems & Multiplex Classifications. Accessed 2026-11-17.
- Racelogic Vehicle CAN Database — Land Rover Freelander. Accessed 2026-11-17.