GEMS EM40: A historical GEMS engine-management identity discussed in the manufacturer's forum. Manufacturer source.
Hardware and control
The forum discussion compares EM40 and EM36 for a particular aspect-file context. It does not establish universal pinout or configuration equivalence; verify actual hardware, software and installation documentation. GEMS model information.
GEMS systems use GWv4 configuration, with the required ECU definition and licence; software options and custom builds can differ. Record the label, hardware and firmware and confirm connected devices against the matching documentation. GWv4 manual.
Connector and wiring
A verified complete model-specific connector pinout was not identified in the reviewed public material. Obtain the specific drawing and build information from GEMS; do not assume the wiring of a similarly named controller.
Further references
Sources reviewed 17 November 2026.
Communications connector: integration source
Race Technology's GEMS EM40 integration guide lists the following nine-way D-type communication socket. Its connection paragraph also calls the port “E36”, so confirm the identity and options on the actual EM40 before use. The page describes CAN and RS-422 as options. This is the communication connector only; the main engine connector schedule has not been verified.
| Pin | Documented function |
|---|---|
| 1 | CAN L (optional) |
| 2 | TX, PC RS-232C |
| 3 | RX, PC RS-232C |
| 4 | BUSB, RS-422 (optional) |
| 5 | Ground |
| 6 | CAN H (optional) |
| 7 | BUSZ, RS-422 (optional) |
| 8 | BUSY, RS-422 (optional) |
| 9 | BUSA, RS-422 (optional) |