Model and vehicle application
Syvecs lists this vehicle-specific standalone or plug-in ECU kit as Nissan Skyline GTR R32 R33 R34 S7i, with product code S7i-NGTR2. The product page and its stated vehicle, model and transmission details define this particular application; confirm market, model year, engine, ECU connector and transmission against Syvecs before ordering.
This entry describes the dedicated vehicle kit. It is distinct from the generic wire-in ECU: a plug-in kit can use application-specific adaptor wiring, a carrier, additional modules and an application calibration. The listed hardware or supported equipment can vary by revision.
Wiring and pinout
Syvecs Nissan Skyline GTR R32 R33 R34 S7i installation and wiring document. Follow the connector orientation, application-specific tables, installation notes and hardware revision in this document. Do not transfer assignments from another vehicle merely because the underlying ECU family is similar. The link was checked to return a PDF.
For other variants and manual revisions consult the manufacturer's vehicle-specific manual index. Available spare inputs and outputs can be used only within their electrical limits and with a matching calibration.
Calibration and service
Use the correct Syvecs software, firmware and base calibration for the exact vehicle and installed hardware. The Syvecs software portal and firmware archive provide manufacturer support. A base map is a starting point and needs checking against the actual engine, injectors, sensors and modifications.
Sources
- Syvecs Nissan Skyline GTR R32 R33 R34 S7i product listing and application
- Manufacturer kit installation and pinout manual
- Syvecs plug-in kit support index
Manual/model mismatch: the linked R32–R34 kit manual labels its wiring schedule “Pinouts of S7Plus Kit”, whereas this page concerns the S7-i. The document does not establish that its S7Plus connector assignments apply to the S7-i; obtain a confirmed S7-i diagram from Syvecs before wiring.