Wolf 3D V4 is a standalone or earlier programmable engine-management system. Wolf3D V4 is an earlier engine-management model listed by an Australian workshop. Hardware, harness and engine configurations must be identified individually. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Wolf 3D V4 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Documented connections — incomplete
The following individual assignments are from manufacturer Wolf3D V4 dealer bulletins; they are not a complete engine connector table. The oxygen sensor bulletin distinguishes narrowband signal ground from the LSM11 wideband ground; the Alfa 33 trigger example identifies the trigger pins. Confirm other positions using the exact V4 installation manual.
| Main loom pin | Documented function |
|---|---|
| 13 | Signal ground (narrowband oxygen sensor example) |
| 22 | Wideband oxygen signal ground |
| 26 | Oxygen sensor signal |
| 27 | Trigger ground in Alfa 33 crank-sensor example |
| 28 | Trigger 1 in Alfa 33 crank-sensor example |
Separately, the AiM Wolf3D V4 logger guide identifies the communications / memory-cartridge port pins 13 as RS232 receive, 14 as RS232 transmit, and 15 as ground. These are communications-port positions, not main-loom pins with the same numbers.