
Autronic SM2 is a standalone or earlier programmable engine-management system. SM2 lists eight selectable peak-and-hold injector drivers and four ignition outputs; standard ignition does not have dwell control. It has separate J1/J2/J3 connector arrangements and RS232 communication. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Autronic SM2 wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
SM2 standard loom connector assignments
Autronic’s SM2 basic wiring, traction-control option, drawing SM2WR105 revision 001 identifies positions 1–10 as J1, 11–28 as J2 and 29–52 as J3. Empty positions below are not labelled in this drawing, not a declaration that they are safe to use. J4 is the serial connection: RxD, TxD and ground are shown but physical pin numbers are not supplied. Confirm connector orientation and equipment options using the drawing before wiring.
| Connector / position | Function in drawing |
|---|---|
| J1 1 | ECU +12 V supply |
| J1 2 | Injector 8 output |
| J1 3 | ECU +12 V supply |
| J1 4 | Injector 7 output |
| J1 5 | Injector 6 output |
| J1 6 | Injector 5 output |
| J1 7 | Injector 4 output |
| J1 8 | Injector 3 output |
| J1 9 | ECU ground |
| J1 10 | ECU ground |
| J2 11 | Injector 2 output |
| J2 12 | PWM 1 output (idle control) |
| J2 13 | Injector 1 output |
| J2 14 | PWM 2 output (boost control) |
| J2 15 | Ignition switch input |
| J2 16 | Solenoid 3 output (spare) |
| J2 17 | Analogue output |
| J2 18 | Coolant temperature input |
| J2 19 | Coolant temperature ground |
| J2 20 | O2 / EGT input |
| J2 21 | Not labelled in source |
| J2 22 | Exhaust back pressure input |
| J2 23 | Not labelled in source |
| J2 24 | Intake air temperature input |
| J2 25 | Intake air ground |
| J2 26 | Throttle position input |
| J2 27 | Throttle position ground |
| J2 28 | Throttle position supply |
| J3 29 | Auxiliary 2 analogue input |
| J3 30 | Auxiliary 4 analogue input |
| J3 31 | Auxiliary 1 analogue input |
| J3 32 | Auxiliary 3 analogue input |
| J3 33 | Auxiliary analogue input ground |
| J3 34 | Trigger supply |
| J3 35 | Trigger ground |
| J3 36 | Reference trigger input |
| J3 37 | Cylinder pulse trigger input |
| J3 38 | Spare speed input (turbo tachometer) |
| J3 39 | Vehicle speed input |
| J3 40 | Switch 1 input (A/C request / traction control enable) |
| J3 41 | Switch 2 input (boost curve select) |
| J3 42 | Not labelled in source |
| J3 43 | Not labelled in source |
| J3 44 | Ignition output ground |
| J3 45 | Relay 1 output (fuel pump) |
| J3 46 | Ignition 1 output |
| J3 47 | Relay 2 output (A/C request) |
| J3 48 | Ignition 2 output |
| J3 49 | Relay 3 output (main cooling fan) |
| J3 50 | Ignition 3 output |
| J3 51 | Relay 4 output (auxiliary cooling fan) |
| J3 52 | Ignition 4 output |