The Adaptronic eMod003 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Nissan S14 Silvia 72-pin; the archive also names S13 CA18DET in the pinout filename. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.
Application and installation
Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.
Model-specific pinout
In the eMod003 section of the manufacturer download archive, find: S14_200SX_Silvia_SR20DET_S13_CA18DET_Pinout.pdf. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: eMod003_S14_SR20DET_v001.ecu.
Documentation limits
Complete channel counts, product photographs and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.
Manufacturer plug-in connector pinout
Transcribed from Adaptronic's eMod003 S14 SR20DET / S13 CA18DET pinout, retained in Haltech's archive. Connector view is looking into the ECU. The table records the Adaptronic assignment, which can differ from the original factory function; consult the source and its model-specific notes before connecting. Pins designated Module 1 depend on any upgrade board installed.
Positions 101–116
| Pin | Adaptronic function in source |
|---|---|
| 101 | Injector output 1 |
| 102 | Auxiliary output 4 |
| 103 | Injector output 3 |
| 104 | Ignition output 6 |
| 105 | No connection |
| 106 | Auxiliary output 1 |
| 107 | Power ground |
| 108 | Power ground |
| 109 | Injector supply |
| 110 | Injector output 2 |
| 111 | Ignition output 5 |
| 112 | Injector output 4 |
| 113 | Injector output 5 |
| 114 | Auxiliary output 2 |
| 115 | Power ground |
| 116 | Power ground |
Positions 1–60
| Pin | Adaptronic function in source |
|---|---|
| 1 | Ignition output 1 |
| 2 | Ignition output 2 |
| 3 | No connection |
| 4 | Auxiliary output 1 |
| 5 | Oil pressure |
| 6 | Ignition output 8 |
| 7 | Tachometer output |
| 8 | Oil temperature |
| 9 | Injector output 7 |
| 10 | Power ground |
| 11 | Ignition output 3 |
| 12 | Ignition output 4 |
| 13 | Fuel pressure |
| 14 | CAN low |
| 15 | CAN high |
| 16 | ECCS hardwired |
| 17 | Fuel temperature |
| 18 | ECCS / fuel pump control output |
| 19 | Injector output 8 |
| 20 | Servo input |
| 21 | External 0–5 V input 1 |
| 22 | External 0–5 V input 2 |
| 23 | Knock input |
| 24 | Module 1: function depends on fitted upgrade |
| 25 | Injector output 6 |
| 26 | Exhaust MAP |
| 27 | Exhaust MAP |
| 28 | Coolant temperature |
| 29 | Oxygen input 1 |
| 30 | Sensor ground |
| 31 | Module 1: function depends on fitted upgrade |
| 32 | Auxiliary output 4 |
| 33 | Ignition output 7 |
| 34 | Digital input 4 |
| 35 | Internal MAP |
| 36 | Manifold air temperature |
| 37 | TPS input 2 |
| 38 | TPS input 1 |
| 39 | Oxygen input 2 |
| 40 | Module 1: function depends on fitted upgrade |
| 41 | CAS 2 |
| 42 | CAS 1 |
| 43 | No connection |
| 44 | Digital input 2 |
| 45 | Ignition switch input |
| 46 | Digital input 3 |
| 47 | CAS 3 |
| 48 | 5 V output |
| 49 | 12 V power input |
| 50 | Power ground |
| 51 | CAS 2 |
| 52 | CAS 1 |
| 53 | Vehicle speed input |
| 54 | Digital input 1 |
| 55 | Module 1: function depends on fitted upgrade |
| 56 | Module 1: function depends on fitted upgrade |
| 57 | Module 1: function depends on fitted upgrade |
| 58 | No connection |
| 59 | 12 V power input |
| 60 | Power ground |