Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MicroTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

The MicroTech LT-9c Fuel Only (manufacturer SKU LT9CFO) is a fuel controller, not the similarly named fuel-and-ignition version. A fuel-only unit that can control additional injectors alongside a factory ECU or operate as a standalone fuel controller. MicroTech identifies four high-impedance drivers and states a minimum 6 ohms per injector; selectable MAP calibration options are listed at 20, 30 and 45 psi. MicroTech manufacturer product description.

Identification and wiring

Record the complete model, hardware, sensor configuration and engine-specific setup before selecting a wiring diagram. MicroTech says the unit is supplied with a labelled flying-lead loom and wiring diagram; an independently verified complete pinout for this fuel-only variant has not yet been located. Obtain its matching diagram from MicroTech before wiring. Do not assume the fuel-and-ignition model's assignments or ignition outputs apply.

See the LT-9c fuel-and-ignition reference and MicroTech model index.