Adaptronic e420d is a standalone or earlier programmable engine-management system. Universal Select e420d controller, supported in WARI. Haltech archives its model-specific diagram and basemap. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Adaptronic e420d wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Manufacturer connector pinout
From the Adaptronic model-specific pinout guide, retained in Haltech's archive. The guide identifies the view from the loom side, notes no connections and requires external ignition igniters; consult it for the driver limits and configuration. Confirm pin view, actual ECU revision, sensor grounding and current limits against the original.
22-way connector
| Pin | Function |
|---|---|
| 1A | Constant 12 V |
| 1B | Ignition 12 V |
| 1C | External 0–5 V analogue input |
| 1D | Auxiliary output 2 |
| 1E | Auxiliary output 6 |
| 1F | Ignition output 3 |
| 1G | Ignition output 1 |
| 1H | Ignition output 2 |
| 1I | No connection |
| 1J | Auxiliary output 3 |
| 1K | No connection |
| 1L | Auxiliary output 7 |
| 1M | Master vehicle speed sensor 1 |
| 1N | No connection |
| 1O | Digital input 3 |
| 1P | Digital input 1 |
| 1Q | Digital input 2 |
| 1R | Auxiliary output 8 |
| 1S | Digital input 4 |
| 1T | Ignition output 4 |
| 1U | No connection |
| 1V | No connection |
26-way connector
| Pin | Function |
|---|---|
| 2A | Power ground |
| 2B | Power ground |
| 2C | Sensor ground |
| 2D | Sensor ground |
| 2E | CAS 1 input |
| 2F | CAS 3 input |
| 2G | CAS 2 input |
| 2H | Auxiliary temperature |
| 2I | No connection |
| 2J | Knock |
| 2K | 5 V sensor supply |
| 2L | No connection |
| 2M | Throttle position signal |
| 2N | Oxygen / EGO input |
| 2O | MAP signal |
| 2P | Manifold air temperature |
| 2Q | Engine coolant temperature |
| 2R | No connection |
| 2S | No connection |
| 2T | Auxiliary output 5 |
| 2U | Injector output 1 |
| 2V | Injector output 4 |
| 2W | Auxiliary output 1 |
| 2X | Auxiliary output 4 |
| 2Y | Injector output 2 |
| 2Z | Injector output 3 |