Adaptronic e440d is a standalone or earlier programmable engine-management system. Universal Select e440d wire-in controller. Haltech lists its own pinout and wiring diagrams and WARI software. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Wiring and pinout
Consult the Adaptronic e440d wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.
Further information
Manufacturer connector pinout
From the Adaptronic model-specific pinout guide, retained in Haltech's archive. These are the universal ECU pin functions from the first three pages, not the factory harness function. The same manual documents additional Mazda NA6, NA8 and Familia wiring differences; follow the matching vehicle section and required harness changes. Confirm pin view, actual ECU revision, sensor grounding and current limits against the original.
22-way connector
| Pin | Function |
|---|---|
| 1A | Constant 12 V (source says not required) |
| 1B | Ignition 12 V |
| 1C | External 0–5 V analogue input |
| 1D | Auxiliary output 2 |
| 1E | Auxiliary output 6 |
| 1F | Ignition output 3 |
| 1G | Ignition output 1 |
| 1H | Ignition output 2 |
| 1I | Slave vehicle speed sensor 1 |
| 1J | Auxiliary output 3 |
| 1K | Slave vehicle speed sensor 2 |
| 1L | Auxiliary output 7 |
| 1M | Master vehicle speed sensor 1 |
| 1N | Digital input 7 |
| 1O | Digital input 3 |
| 1P | Digital input 1 |
| 1Q | Digital input 2 |
| 1R | Auxiliary output 8 |
| 1S | Digital input 4 |
| 1T | Ignition output 4 |
| 1U | Digital input 5 |
| 1V | Digital input 6 |
26-way connector
| Pin | Function |
|---|---|
| 2A | Power ground |
| 2B | Power ground |
| 2C | Sensor ground |
| 2D | Sensor ground |
| 2E | CAS 1 input |
| 2F | CAS 3 input |
| 2G | CAS 2 input |
| 2H | Auxiliary temperature |
| 2I | No connection |
| 2J | Knock |
| 2K | 5 V sensor supply |
| 2L | Digital input 8 |
| 2M | Throttle position signal |
| 2N | Oxygen / EGO input (0–1 V factory sensor; see source for wideband) |
| 2O | MAP signal |
| 2P | Manifold air temperature |
| 2Q | Engine coolant temperature |
| 2R | Master vehicle speed sensor 2 |
| 2S | No connection |
| 2T | Auxiliary output 5 |
| 2U | Injector output 1 |
| 2V | Injector output 4 |
| 2W | Auxiliary output 1 |
| 2X | Auxiliary output 4 |
| 2Y | Injector output 2 |
| 2Z | Injector output 3 |