Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Holley EFI standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
Sniper 2 EFI throttle body with integrated ECU
Sniper 2 EFI throttle body with integrated ECU. Image from the Holley manufacturer manual, cover; reproduced with permission.

Sniper 2 is the second generation of Holley's integrated throttle-body EFI system; the ECU and throttle body are a package rather than a generic HP or Terminator module. The 550-511 product information describes updated ECU electronics and a main harness with HyperSpark distributor support.

Wiring and ignition

Holley's system installation diagrams identify a 16-pin main connector, separate CAN and six-pin optional I/O harness for the documented 550-511 arrangement. Its ignition options guide distinguishes a coil-minus RPM-only input from supported timing-control configurations. Verify the specific throttle body, harness, ignition and sensor setup.

See the Holley EFI manufacturer index. Sources reviewed 17 November 2026.