
Haltech Elite 750 is a programmable engine-management ECU in Haltech's Elite family. Six injector and six ignition outputs, 2 analogue voltage inputs and no half-bridge outputs in Haltech's comparison. Haltech universal comparison.
Identification and I/O
| Item | Manufacturer comparison |
|---|---|
| Injector channels | 6, peak-and-hold |
| Ignition channels | 6 |
| Digital pulsed outputs | 5 |
| MAP sensor | 4 bar internal |
| Tuning software | ESP for Elite firmware 2.xx; NSP for Elite firmware 3.xx; verify installed firmware |
Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.
Pinout and wiring
Use the manufacturer wiring diagrams and select the Elite 750 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.
Software and further information
Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.
34-way connector pinout
Transcribed from the Haltech Elite 750 complete pinout. Manufacturer wire-colour abbreviations are retained; a dash means no function is shown in the source. The * symbol identifies the manufacturer's default allocation, which may be configurable. Use the original diagram for connector orientation and electrical limits.
| Pin | Wire colour code | Function |
|---|---|---|
| 1 | V/BR | DPO 2 |
| 2 | GY/Y <SHD> | AVI 1 (* O2 Sensor) |
| 3 | Y/B | IGN 1 |
| 4 | Y/R | IGN 2 |
| 5 | Y/O | IGN 3 |
| 6 | Y/G | IGN 4 |
| 7 | Y/BR | IGN 5 |
| 8 | Y/L | IGN 6 |
| 9 | O | +5V DC |
| 10 | B | BATTERY GROUND |
| 11 | B/W | SIGNAL GROUND |
| 12 | GY <SHD> | DPI 1 |
| 13 | GY/B <SHD> | DPI 2 |
| 14 | W | THROTTLE POSITION SENSOR |
| 15 | Y | AVI 3 (* MAP ) |
| 16 | W | CAN H |
| 17 | L | CAN L |
| 18 | V/B | DPO 1 |
| 19 | L | INJ 1 |
| 20 | L/B | INJ 2 |
| 21 | L/BR | INJ 3 |
| 22 | L/R | INJ 4 |
| 23 | V/R | DPO 3 |
| 24 | B/Y | DPO 5 (* Fuel Pump Relay) |
| 25 | V/O | DPO 4 |
| 26 | R/L | +13.8V ECU / INJECTOR PWR |
| 27 | L/O | INJ 5 |
| 28 | L/Y | INJ 6 |
| 29 | GY | AIR TEMPERATURE |
| 30 | V | COOLANT TEMPERATURE |
| 31 | Y (GY 4C) | TRIGGER + |
| 32 | Y (GY/B 4C) | HOME + |
| 33 | G (GY 4C) | TRIGGER - |
| 34 | G (GY/B 4C) | HOME - |