Removed text is struck through; added text is highlighted.
Haltech Elite VMS (HT-157000) product photograph: Haltech product image library; reproduced with permission.
Haltech Elite VMS: Ignition-only Vehicle Management System for mechanically injected and carburetted drag-racing applications. Haltech describes eight ignition channels, two engine-position inputs, nine digital pulsed outputs, five analogue inputs and one CAN connection; it is not a standalone fuel-injection ECU. VMS does not have the VMS T model's advanced torque-management functionality. Haltech VMS / VMS T overview.
The manufacturer's overview lists a 34-position AMP connector, 8–16 V supply, USB communication and logging. Match the hardware and firmware to the actual vehicle, ignition modules and wiring.
VMS / VMS T connector pinout
Haltech publishes this shared 34-position table for VMS and VMS T. Use its connector illustration to establish orientation and its universal wiring diagram for circuits and limits.
See Haltech model index. VMS and VMS T are retained here as related ignition-only products and should not be mistaken for full fuel-and-ignition ECUs.
34-way connector pinout
The Haltech Elite VMS / VMS T pinout lists the following positions and loom wire codes for both ignition-only units. Verify connector orientation, hardware and configured outputs with the original diagram.
Open each version to inspect formatting, tables and photographs.
Revision 3: Haltech Elite VMSHaltech Elite VMS (HT-157000) product photograph: Haltech product image library; reproduced with permission.
Haltech Elite VMS: Ignition-only Vehicle Management System for mechanically injected and carburetted drag-racing applications. Haltech describes eight ignition channels, two engine-position inputs, nine digital pulsed outputs, five analogue inputs and one CAN connection; it is not a standalone fuel-injection ECU. VMS does not have the VMS T model's advanced torque-management functionality. Haltech VMS / VMS T overview.
The manufacturer's overview lists a 34-position AMP connector, 8–16 V supply, USB communication and logging. Match the hardware and firmware to the actual vehicle, ignition modules and wiring.
See Haltech model index. VMS and VMS T are retained here as related ignition-only products and should not be mistaken for full fuel-and-ignition ECUs.
34-way connector pinout
The Haltech Elite VMS / VMS T pinout lists the following positions and loom wire codes for both ignition-only units. Verify connector orientation, hardware and configured outputs with the original diagram.
Pin
Wire colour code
Function
1
V/BR
DPO 2
2
GY/Y
AVI 1
3
Y/B
IGN 1
4
Y/R
IGN 2
5
Y/O
IGN 3
6
Y/G
IGN 4
7
Y/BR
IGN 5
8
Y/L
IGN 6
9
O
+5V DC
10
B
BATTERY GROUND
11
B/W
SIGNAL GROUND
12
GY <SHD>
DPI 1
13
GY/B
DPI 2
14
W
AVI 2
15
Y
AVI 3
16
W
CAN H
17
L
CAN L
18
V/B
DPO 1
19
L
DPO 6
20
L/B
DPO 7
21
L/BR
DPO 8
22
L/R
DPO 9
23
V/R
DPO 3
24
B/Y
DPO 5
25
V/O
DPO 4
26
R/L
+13.8V ECU PWR
27
Y/V
IGN 7
28
Y/GY
IGN 8
29
GY
AVI 4
30
V
AVI 5
31
Y (GY 4C)
TRIGGER +
32
Y (GY/B 4C)
HOME +
33
G (GY 4C)
TRIGGER -
34
G (GY/B 4C)
HOME -
Revision 3: Haltech Elite VMSHaltech Elite VMS (HT-157000) product photograph: Haltech product image library; reproduced with permission.
Haltech Elite VMS: Ignition-only Vehicle Management System for mechanically injected and carburetted drag-racing applications. Haltech describes eight ignition channels, two engine-position inputs, nine digital pulsed outputs, five analogue inputs and one CAN connection; it is not a standalone fuel-injection ECU. VMS does not have the VMS T model's advanced torque-management functionality. Haltech VMS / VMS T overview.
The manufacturer's overview lists a 34-position AMP connector, 8–16 V supply, USB communication and logging. Match the hardware and firmware to the actual vehicle, ignition modules and wiring.
See Haltech model index. VMS and VMS T are retained here as related ignition-only products and should not be mistaken for full fuel-and-ignition ECUs.
34-way connector pinout
The Haltech Elite VMS / VMS T pinout lists the following positions and loom wire codes for both ignition-only units. Verify connector orientation, hardware and configured outputs with the original diagram.