Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
FuelTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
FT500 ECU
FT500 product image from the FuelTech manufacturer manual, page 6; reproduced with permission.

FuelTech FT500 is a PowerFT engine-management unit. PowerFT ECU with eight blue injector and eight grey ignition outputs. Unused grey/yellow outputs can be allocated to injection only with the driver specified in the manual. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager; FT500/500LITE software compatibility is capped at 4.91 per FuelTech. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT500 SFI / FT500LITE SFI ECU connector assignments

The FuelTech FT500 SFI / FT500LITE SFI installation manual, sections 4.1–4.2, specifies these rear-view connector positions. Sensor inputs and blue, gray and yellow outputs can be configured. Verify the ECU revision, wiring view, electrical ratings and grounding before use; the magnetic RPM reference is not a general sensor ground.

24-way connector

PinFunction
1Gray output #8
2Blue output #6
3White input #7
4Blue output #7
5White input #6
6Blue output #8
7White input #5
8Magnetic RPM sensor reference
9White input #4
10Gray output #5
11White input #11
12Gray output #4
13Blue output #3
14Gray output #3
15Cam sync signal input
16Gray output #2
17RPM signal input
18Gray output #1
19Battery negative input
205 V output for sensors
2112 V input from main relay
22Power ground
23Blue output #2
24Blue output #1

16-way connector

PinFunction
1White input #1
2Gray output #6
3White input #10
4Gray output #7
5White input #2
6Blue output #4
7White input #3
8Blue output #5
9Power ground
10White input #9
11Power ground
12White input #8
13Yellow output #1
14Yellow output #2
15Yellow output #3
16Yellow output #4

Do not infer these assignments from earlier FT-series looms: FuelTech documents repurposed wires and pins when upgrading from older models.