Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MicroTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

MicroTech LT-15c is a standalone or earlier programmable engine-management system. The LT-15c appears in MicroTech's wideband wiring guide. Its output capability and exact ECU connector functions require the specific hardware and engine wiring diagram. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Wiring and pinout

The MicroTech LSU 4.9 wideband guide identifies the LT-15c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.

Further information

MicroTech LT-15c model informationLSU 4.9 wideband connection guide (partial wiring only)MicroTech manufacturer index

Wideband controller connectionsMicroTech's LSU 4.9 wideband kit guide identifies these 15C ECU connections. The guide says to splice the LSU controller's brown ground lead into the matching brown sensor-ground wire on the ECU's 24-way main harness. This table covers the wideband signal and ground only, not the full ECU connector.ECU wireFunctionBlack/redOxygen sensor inputBrownOxygen sensor ground

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: MicroTech LT-15c

MicroTech LT-15c is a standalone or earlier programmable engine-management system. The LT-15c appears in MicroTech's wideband wiring guide. Its output capability and exact ECU connector functions require the specific hardware and engine wiring diagram. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Wiring and pinout

The MicroTech LSU 4.9 wideband guide identifies the LT-15c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.

Further information

Revision 3: MicroTech LT-15c

MicroTech LT-15c is a standalone or earlier programmable engine-management system. The LT-15c appears in MicroTech's wideband wiring guide. Its output capability and exact ECU connector functions require the specific hardware and engine wiring diagram. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Wiring and pinout

The MicroTech LSU 4.9 wideband guide identifies the LT-15c oxygen-sensor connection; it is not a complete ECU pinout. The full ECU wiring diagram has not yet been verified for this page. Obtain the diagram matching the exact unit, engine configuration and harness from MicroTech before wiring.

Further information

Wideband controller connections

MicroTech's LSU 4.9 wideband kit guide identifies these 15C ECU connections. The guide says to splice the LSU controller's brown ground lead into the matching brown sensor-ground wire on the ECU's 24-way main harness. This table covers the wideband signal and ground only, not the full ECU connector.

ECU wireFunction
Black/redOxygen sensor input
BrownOxygen sensor ground