Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Haltech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
Haltech Elite 2500 ECU
Elite 2500 product photograph, Haltech; permission to republish confirmed by the user.

Haltech Elite 2500 is a programmable engine-management ECU in Haltech's Elite family. Eight injector and ignition channels, 10 analogue inputs and half-bridge outputs for stepper or electronic throttle. Haltech universal comparison.

Identification and I/O

ItemManufacturer comparison
Injector channels8, peak-and-hold
Ignition channels8
Digital pulsed outputs5
MAP sensor4 bar internal
Tuning softwareESP for Elite firmware 2.xx; NSP for Elite firmware 3.xx; verify installed firmware

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Elite 2500 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Manufacturer connector tables

The following are the manufacturer-listed 34-way and 26-way connector assignments for the Elite 2500, including the loom wire-colour abbreviations used by Haltech. A dash is retained where the manufacturer does not list an assignment. Confirm ECU part number, connector view, software configuration and electrical limits against the linked original diagrams; do not transfer assignments from another model. On the 34-way plug, the ECU injector-power input is required for ECU operation.

34-way connector

Haltech Elite 2500 34-pin manufacturer pinout

PinWire colour codeFunction in source
1V/BRDPO 2
2O/YAVI 4
3Y/BIGN 1
4Y/RIGN 2
5Y/OIGN 3
6Y/GIGN 4
7Y/BRIGN 5
8Y/LIGN 6
9O+5V DC
10BBATTERY GROUND
11BBATTERY GROUND
12O/W+8V DC
13P12V IGNITION INPUT
14WAVI 10 ( TPS )
15YAVI 9 ( MAP )
16O/BAVI 2
17O/RAVI 3
18V/BDPO 1
19LINJ 1
20L/BINJ 2
21L/BRINJ 3
22L/RINJ 4
23V/RDPO 3
24B/YDPO 5 ( FUEL PUMP TRIGGER)
25B/RDPO 6 ( ECR OUT)
26R/LECU INJECTOR POWER INPUT (REQUIRED CONNECTION FOR ECU TO OPERATE)
27L/OINJ 5
28L/YINJ 6
29L/GINJ 7
30L/VINJ 8
31GSTEPPER 1 P1 / DPO
32G/BSTEPPER 1 P2 / DPO
33G/BRSTEPPER 1 P3 / DPO
34G/RSTEPPER 1 P4 / DPO

26-way connector

Haltech Elite 2500 26-pin manufacturer pinout

PinWire colour codeFunction in source
1Y (SHD)CRANK (TRIGGER) ( + )
2Y (SHD)CAM (HOME) ( + )
3GYAVI 7 (AIR TEMP)
4VAVI 8 (COOLANT TEMP)
5G (SHD)CRANK (TRIGGER) ( - )
6G (SHD)CAM (HOME) ( - )
7GY/R (SHD)SPI 4
8GY (SHD)SPI 1
9GY/B (SHD)SPI 2
10GY/BR (SHD)SPI 3
11R/W+13.8V ECU SUPPLY (ECU POWER)
12GY/O (SHD)AVI 6 (O2 INPUT 1)
13GY/Y (SHD)AVI 1 (O2 INPUT 2 )
14B/WSIGNAL GROUND
15B/WSIGNAL GROUND
16B/WSIGNAL GROUND
17Y/VIGN 7
18Y/GYIGN 8
19V/ODPO 4
20O/GAVI 5
21GY/GKNOCK 1
22GY/LKNOCK 2
23WCAN H
24LCAN L
25BR/BDBW 1 / DPO
26BR/RDBW 2 / DPO

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

Haltech groups the Elite 2500 basic, premium and race-expansion harness wiring diagrams with its Elite 1500/2500/REM downloads. Select the exact 2500 harness entry on that page.