Removed text is struck through; added text is highlighted.
MaxxECU GEN2 TRACK, one compatible ECU; the vehicle-specific adapter is separate and is not shown. Image: MaxxECU; reproduced with permission.
MaxxECU Volvo S60 ME 7.0 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.
Applicability
The manufacturer specifies GEN2 TRACK or RACE, Volvo ME 7.0, and a 2004 S60 2.5T example, manual transmission only. It calls for a separate OEM ECU removal tool and lists a dedicated Volvo ME 7.0 CAN mode. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.
Manufacturer's function mapping
These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.
The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.
PinDescriptionUsageNoteGEN2 TRACKGEN2 RACE1 (H)Engine GNDYESYES2 (G)+12V MAINMain DME relay powerYESYES3 (F)GP OUT 15 (H-BRIDGE 2)YESYES4 (E)GP OUT 16 (H-BRIDGE 2)YESYES5 (D)IGNITION 10NOYES6 (C)IGNITION 11NOYES7 (B)IGNITION 9NOYES8 (A)INJECTOR 8YESYES9 (S)AIN/DIN 8Analog / digital inputYESYES10 (R)AIN/DIN 16Analog / digital inputYESYES11 (P)AIN/DIN 17Analog / digital inputNOYES12 (N)AIN/DIN 18Analog / digital inputNOYES13 (M)AIN/DIN 19Analog / digital inputNOYES14 (L)AIN/DIN 20Analog / digital inputNOYES15 (K)+5V sensor supplyYESYES16 (J)Sensor GNDYESYES
Documents and wiring
See the exact adapter and pinout guide for additional connectors, wideband wiring, power feeds, fuses and any limitations. The GEN2 plug-in index and MaxxECU family reference cover other hardware and applications. Review firmware and functions for the specific setup.
Source reviewed 17 November 2026.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: MaxxECU GEN2 Volvo S60 ME 7.0 plug-in adapterMaxxECU GEN2 TRACK, one compatible ECU; the vehicle-specific adapter is separate and is not shown. Image: MaxxECU; reproduced with permission.
MaxxECU Volvo S60 ME 7.0 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.
Applicability
The manufacturer specifies GEN2 TRACK or RACE, Volvo ME 7.0, and a 2004 S60 2.5T example, manual transmission only. It calls for a separate OEM ECU removal tool and lists a dedicated Volvo ME 7.0 CAN mode. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.
Manufacturer's function mapping
These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.
Options
OEM ECU PIN
MaxxECU IO
GEN2 TRACK
GEN2 RACE
Note
5 injection sequential
A16, A34, A15, A33, A14
INJ 1-5
YES
YES
5 ignition sequential
A30,A31,A50,A51,A52
IGN 1-5
YES
YES
FAN (PWM)
A7
GPO 1 (LOW)
YES
YES
Fuel pump relay
B45
GPO 2 (LOW)
YES
YES
Fuel pump PWM
B47
GPO 3 (LOW)
YES
YES
S60R only
Starter relay
B23
GPO 4 (GND)
YES
YES
Intake VVTi solenoid
A13
GPO 5 (LOW)
YES
YES
Exhaust VVTi solenoid
A21
GPO 6 (LOW)
YES
YES
DME relay control
B38
GPO 7 (GND)
YES
YES
EVAP Purge
A9
GPO 8 (LOW)
YES
YES
Lambda sensor (LSU 4.2)
IGN 6 (H-)
YES
YES
AC magnetic clutch
B44
IGN 7 (GND)
YES
YES
Check engine light (CEL)
B46
IGN 8 (GND)
YES
YES
Cooling fan relay
B48
INJ 7 (GND)
YES
YES
Boost solenoid
A38
INJ 6 (GND)
YES
YES
E-Throttle with cruise control
A35, A36
GPO 13/ GPO 14
YES
YES
Coolant sensor
A4
AIN 1
YES
YES
Intake temp sensor
A5
AIN 2
YES
YES
Throttle position
A1, A20
AIN3, AIN4
YES
YES
Fuel pressure signal
A2
AIN 6
YES
YES
Fuel temp signal
A3
AIN 7
YES
YES
Clutch position
B15
AIN 9
YES
YES
Brake light
B26
DIN 10
YES
YES
Outside temp
B29
AIN 11
YES
YES
Oil pressure switch
A26
DIN 12
YES
YES
AC pressure sensor
A68
AIN 13
YES
YES
Coolant level sensor
B8
AIN 14
YES
YES
Crank trigger
A48
PULSE1
YES
YES
Intake CAM trigger
A47
PULSE2
YES
YES
Exhaust CAM trigger
A27
PULSE3
YES
YES
Pedal position
B25, B17
PULSE4, DIN5
YES
YES
OEM knock sensors
A46, A45
KNOCK1, KNOCK2
YES
YES
KEY IN
B37
12V KEY ON
YES
YES
Constant power to charge tablet
B11
12V CONSTANT
YES
YES
OEM mass air mass sensor
NO
NO
Control signal, leak diagnostic unit
B7, B40
NO
NO
Diagnostic C-link
B22
NO
NO
Intstrument cluster
Volvo ME 7.0 (500kbit)
EGT connectors
NO
NO*
*Requires harness 4
Bluetooth ( MDash)
YES
YES
Additional connector
The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.
Revision 2: MaxxECU GEN2 Volvo S60 ME 7.0 plug-in adapterMaxxECU GEN2 TRACK, one compatible ECU; the vehicle-specific adapter is separate and is not shown. Image: MaxxECU; reproduced with permission.
MaxxECU Volvo S60 ME 7.0 GEN2 plug-in adapter joins a compatible GEN2 ECU to a specified factory engine harness. This is a vehicle-specific adapter system, not a different universal ECU model. Manufacturer's installation guide.
Applicability
The manufacturer specifies GEN2 TRACK or RACE, Volvo ME 7.0, and a 2004 S60 2.5T example, manual transmission only. It calls for a separate OEM ECU removal tool and lists a dedicated Volvo ME 7.0 CAN mode. Check the exact vehicle, engine, ECU number, harness and hardware revision against the manufacturer guide before purchasing or installing.
Manufacturer's function mapping
These assignments are specific to the documented GEN2 adapter and ECU configuration, not a universal vehicle pinout. Confirm calibration, connector face and configuration in the source.
Options
OEM ECU PIN
MaxxECU IO
GEN2 TRACK
GEN2 RACE
Note
5 injection sequential
A16, A34, A15, A33, A14
INJ 1-5
YES
YES
5 ignition sequential
A30,A31,A50,A51,A52
IGN 1-5
YES
YES
FAN (PWM)
A7
GPO 1 (LOW)
YES
YES
Fuel pump relay
B45
GPO 2 (LOW)
YES
YES
Fuel pump PWM
B47
GPO 3 (LOW)
YES
YES
S60R only
Starter relay
B23
GPO 4 (GND)
YES
YES
Intake VVTi solenoid
A13
GPO 5 (LOW)
YES
YES
Exhaust VVTi solenoid
A21
GPO 6 (LOW)
YES
YES
DME relay control
B38
GPO 7 (GND)
YES
YES
EVAP Purge
A9
GPO 8 (LOW)
YES
YES
Lambda sensor (LSU 4.2)
IGN 6 (H-)
YES
YES
AC magnetic clutch
B44
IGN 7 (GND)
YES
YES
Check engine light (CEL)
B46
IGN 8 (GND)
YES
YES
Cooling fan relay
B48
INJ 7 (GND)
YES
YES
Boost solenoid
A38
INJ 6 (GND)
YES
YES
E-Throttle with cruise control
A35, A36
GPO 13/ GPO 14
YES
YES
Coolant sensor
A4
AIN 1
YES
YES
Intake temp sensor
A5
AIN 2
YES
YES
Throttle position
A1, A20
AIN3, AIN4
YES
YES
Fuel pressure signal
A2
AIN 6
YES
YES
Fuel temp signal
A3
AIN 7
YES
YES
Clutch position
B15
AIN 9
YES
YES
Brake light
B26
DIN 10
YES
YES
Outside temp
B29
AIN 11
YES
YES
Oil pressure switch
A26
DIN 12
YES
YES
AC pressure sensor
A68
AIN 13
YES
YES
Coolant level sensor
B8
AIN 14
YES
YES
Crank trigger
A48
PULSE1
YES
YES
Intake CAM trigger
A47
PULSE2
YES
YES
Exhaust CAM trigger
A27
PULSE3
YES
YES
Pedal position
B25, B17
PULSE4, DIN5
YES
YES
OEM knock sensors
A46, A45
KNOCK1, KNOCK2
YES
YES
KEY IN
B37
12V KEY ON
YES
YES
Constant power to charge tablet
B11
12V CONSTANT
YES
YES
OEM mass air mass sensor
NO
NO
Control signal, leak diagnostic unit
B7, B40
NO
NO
Diagnostic C-link
B22
NO
NO
Intstrument cluster
Volvo ME 7.0 (500kbit)
EGT connectors
NO
NO*
*Requires harness 4
Bluetooth ( MDash)
YES
YES
Additional connector
The model-specific guide provides the following extra connector positions. Check its drawing for the view and pin labels; available outputs differ between TRACK and RACE.