Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Link standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
Link G4X AtomX ECU
G4X AtomX manufacturer photograph: Link ECU. Permission to republish confirmed by the user.

Link G4X AtomX is a programmable G4X wire-in engine-management ECU. One A loom. The documented V3 and newer hardware supports knock through pin 6; earlier hardware lacks that knock circuit. Link G4X AtomX quick-start guide.

Model identification and I/O

ItemDocumented details
ECU familyG4X
Outputs4 injection and 4 ignition drives
ProgrammingPCLink version matched to ECU generation and firmware
Connector and loomSee the exact-model guide, including connector keys, wire-side orientation and optional functions

The manufacturer guidance and wiring identify the hardware; driver counts do not establish injector electrical compatibility or imply all multiplexed pins can be used at the same time.

Model-specific pinout and installation

The G4X AtomX quick-start guide provides the connector diagrams and installer I/O table. Refer to that version for numbered cavities, wire colours, supply, grounds, driver and sensor connection notes. Loom wire-side and ECU header views are identified on the diagram; do not transfer a pin number from another generation.

Complete loom connector tables

The following positions are transcribed from the Link ATOMX quick-start guide. They are viewed into the ECU header or the wire side of the loom, as illustrated in the source. Unlabelled positions are shown as such, rather than assumed unused. Colours apply to the documented loom; outputs and shared functions depend on ECU hardware version and configuration. Refer to the original for keying, current limits and full installation diagrams.

A/B loom connector A — 34-way

PinFunction in guideLoom colour
1Injector 4Brown/Orange
2Injector 3Brown/Red
3Injector 2Brown
4Injector 1Brown/Black
5+14 VRed
6Knock, hardware version 3 or newerRed/White
7Shield/GroundGreen
8Trigger 1Black
9Trigger 2Red
10Ignition 4Blue/Orange
11Ignition 3Blue/Red
12Ignition 2Blue/Brown
13Ignition 1Blue
14Not labelled in guide—
15Temperature 1Yellow
16Temperature 2Yellow/Brown
17Analogue voltage 1Yellow/Blue
18Auxiliary 4Orange
19Auxiliary 3Orange/Red
20Auxiliary 2Orange/Brown
21Auxiliary 1Orange/Black
22Analogue voltage 2White/Brown
23Not labelled in guide—
24Ground outGreen
25GroundBlack
26Not labelled in guide—
27Not labelled in guide—
28CAN highOrange/Green
29CAN lowOrange/Yellow
30Digital input 1Grey/Black
31Digital input 2Grey/Brown
32+5 VRed/Blue
33Analogue voltage 3Yellow/Black
34GroundBlack

Software and further sources

Download software, firmware and full installation help from Link's download centre; identify the ECU generation and installed firmware before choosing a PCLink package. The legacy software list separates G5, G4X and G4+ compatibility. See also Link standalone ECUs.