Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
FuelTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 4

Removed text is struck through; added text is highlighted.

FT500LITE product image from the FuelTech manufacturer manual, page 6; reproduced with permission.

FuelTech FT500LITE is a PowerFT engine-management unit. Screenless FT500-family ECU. FuelTech says it uses the FT500 harness and calibration family; setup is via FTManager. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager; verify version. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT500 SFI / FT500LITE SFI ECU connector assignments

The FuelTech FT500 SFI / FT500LITE SFI installation manual, sections 4.1–4.2, specifies these rear-view connector positions. Sensor inputs and blue, gray and yellow outputs can be configured. Verify the ECU revision, wiring view, electrical ratings and grounding before use; the magnetic RPM reference is not a general sensor ground.

24-way connector

PinFunction1Gray output #82Blue output #63White input #74Blue output #75White input #66Blue output #87White input #58Magnetic RPM sensor reference9White input #410Gray output #511White input #1112Gray output #413Blue output #314Gray output #315Cam sync signal input16Gray output #217RPM signal input18Gray output #119Battery negative input205 V output for sensors2112 V input from main relay22Power ground23Blue output #224Blue output #1

16-way connector

PinFunction1White input #12Gray output #63White input #104Gray output #75White input #26Blue output #47White input #38Blue output #59Power ground10White input #911Power ground12White input #813Yellow output #114Yellow output #215Yellow output #316Yellow output #4

Do not infer these assignments from earlier FT-series looms: FuelTech documents repurposed wires and pins when upgrading from older models.

Structured pinoutA structured pin index and redrawn connector diagrams for the FT500 and FT500LITE are in FuelTech FT500 and FT500LITE connector pinout.Not establishedThe microcontroller used in the FT500 and FT500LITE is not named in FuelTech's published documentation.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: FuelTech FT500LITE

FuelTech FT500LITE is a PowerFT engine-management unit. Screenless FT500-family ECU. FuelTech says it uses the FT500 harness and calibration family; setup is via FTManager. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager; verify version. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT500 SFI / FT500LITE SFI ECU connector assignments

The FuelTech FT500 SFI / FT500LITE SFI installation manual, sections 4.1–4.2, specifies these rear-view connector positions. Sensor inputs and blue, gray and yellow outputs can be configured. Verify the ECU revision, wiring view, electrical ratings and grounding before use; the magnetic RPM reference is not a general sensor ground.

24-way connector

PinFunction
1Gray output #8
2Blue output #6
3White input #7
4Blue output #7
5White input #6
6Blue output #8
7White input #5
8Magnetic RPM sensor reference
9White input #4
10Gray output #5
11White input #11
12Gray output #4
13Blue output #3
14Gray output #3
15Cam sync signal input
16Gray output #2
17RPM signal input
18Gray output #1
19Battery negative input
205 V output for sensors
2112 V input from main relay
22Power ground
23Blue output #2
24Blue output #1

16-way connector

PinFunction
1White input #1
2Gray output #6
3White input #10
4Gray output #7
5White input #2
6Blue output #4
7White input #3
8Blue output #5
9Power ground
10White input #9
11Power ground
12White input #8
13Yellow output #1
14Yellow output #2
15Yellow output #3
16Yellow output #4

Do not infer these assignments from earlier FT-series looms: FuelTech documents repurposed wires and pins when upgrading from older models.

Revision 4: FuelTech FT500LITE
FT500LITE ECU
FT500LITE product image from the FuelTech manufacturer manual, page 6; reproduced with permission.

FuelTech FT500LITE is a PowerFT engine-management unit. Screenless FT500-family ECU. FuelTech says it uses the FT500 harness and calibration family; setup is via FTManager. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager; verify version. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT500 SFI / FT500LITE SFI ECU connector assignments

The FuelTech FT500 SFI / FT500LITE SFI installation manual, sections 4.1–4.2, specifies these rear-view connector positions. Sensor inputs and blue, gray and yellow outputs can be configured. Verify the ECU revision, wiring view, electrical ratings and grounding before use; the magnetic RPM reference is not a general sensor ground.

24-way connector

PinFunction
1Gray output #8
2Blue output #6
3White input #7
4Blue output #7
5White input #6
6Blue output #8
7White input #5
8Magnetic RPM sensor reference
9White input #4
10Gray output #5
11White input #11
12Gray output #4
13Blue output #3
14Gray output #3
15Cam sync signal input
16Gray output #2
17RPM signal input
18Gray output #1
19Battery negative input
205 V output for sensors
2112 V input from main relay
22Power ground
23Blue output #2
24Blue output #1

16-way connector

PinFunction
1White input #1
2Gray output #6
3White input #10
4Gray output #7
5White input #2
6Blue output #4
7White input #3
8Blue output #5
9Power ground
10White input #9
11Power ground
12White input #8
13Yellow output #1
14Yellow output #2
15Yellow output #3
16Yellow output #4

Do not infer these assignments from earlier FT-series looms: FuelTech documents repurposed wires and pins when upgrading from older models.

Structured pinout

A structured pin index and redrawn connector diagrams for the FT500 and FT500LITE are in FuelTech FT500 and FT500LITE connector pinout.

Not established

The microcontroller used in the FT500 and FT500LITE is not named in FuelTech's published documentation.