FuelTech FT500LITE is a PowerFT engine-management unit. Screenless FT500-family ECU. FuelTech says it uses the FT500 harness and calibration family; setup is via FTManager. FuelTech model documentation · FuelTech range comparison.
Identification and software
Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager; verify version. FuelTech software and compatibility.
Wiring and pinout
Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.
See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.
FT500 SFI / FT500LITE SFI ECU connector assignments
The FuelTech FT500 SFI / FT500LITE SFI installation manual, sections 4.1–4.2, specifies these rear-view connector positions. Sensor inputs and blue, gray and yellow outputs can be configured. Verify the ECU revision, wiring view, electrical ratings and grounding before use; the magnetic RPM reference is not a general sensor ground.
24-way connector
| Pin | Function |
|---|---|
| 1 | Gray output #8 |
| 2 | Blue output #6 |
| 3 | White input #7 |
| 4 | Blue output #7 |
| 5 | White input #6 |
| 6 | Blue output #8 |
| 7 | White input #5 |
| 8 | Magnetic RPM sensor reference |
| 9 | White input #4 |
| 10 | Gray output #5 |
| 11 | White input #11 |
| 12 | Gray output #4 |
| 13 | Blue output #3 |
| 14 | Gray output #3 |
| 15 | Cam sync signal input |
| 16 | Gray output #2 |
| 17 | RPM signal input |
| 18 | Gray output #1 |
| 19 | Battery negative input |
| 20 | 5 V output for sensors |
| 21 | 12 V input from main relay |
| 22 | Power ground |
| 23 | Blue output #2 |
| 24 | Blue output #1 |
16-way connector
| Pin | Function |
|---|---|
| 1 | White input #1 |
| 2 | Gray output #6 |
| 3 | White input #10 |
| 4 | Gray output #7 |
| 5 | White input #2 |
| 6 | Blue output #4 |
| 7 | White input #3 |
| 8 | Blue output #5 |
| 9 | Power ground |
| 10 | White input #9 |
| 11 | Power ground |
| 12 | White input #8 |
| 13 | Yellow output #1 |
| 14 | Yellow output #2 |
| 15 | Yellow output #3 |
| 16 | Yellow output #4 |
Do not infer these assignments from earlier FT-series looms: FuelTech documents repurposed wires and pins when upgrading from older models.