Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MoTeC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

MoTeC M4, part 11001, is an earlier Gold Box engine controller listed in MoTeC's obsolete-product archive. The manufacturer manual describes four injector groups and gives examples for six-, eight- and twelve-cylinder engines using injectors wired in groups; this is not a claim of separate sequential outputs for each cylinder. Manufacturer Gold Box archive; manufacturer model glossary.

Identification and compatibility

Read the full ECU part number, connector, firmware, options and the label before identifying the correct model. Configurations and optional engine packages vary; a similar suffix, physical plug or a common calibration does not establish a universal pinout or exact cylinder capability. The manufacturer's archived product listing provides M4-specific documentation.

Pinout and software

Consult the MoTeC M4 product and wiring downloads and MoTeC legacy downloads. Model and marine-labelled variants must be checked against their own part numbers, connector drawings and firmware. Confirm connector orientation and the complete power, ground, sensor, injector and ignition circuits with the original documentation before wiring.

These units use a legacy ECU Manager or EMP software generation appropriate to the exact controller and firmware; M1 Tune is for M1 products. See MoTeC software archive and the MoTeC manufacturer guide.