
The Vi-PEC V88 is a V Series wire-in programmable engine-management ECU. Eight injector and eight ignition outputs, two 34-way waterproof connectors, electronic-throttle capability and external MAP sensor according to Link. The product page lists peak-and-hold drivers and two knock sensor inputs. Link-hosted model information.
Wiring and pinout
The official V Series wiring and installation manual has the V88 header pinout, wiring diagrams and trigger sensor detail. Refer to the correct model and revision, as similar A-connector shells can have different functions, optional drivers and sensor circuitry.
Engine loom connector pinout
Transcribed from the Vi-PEC VX installation manual, pages 20–21. The connector view is looking into the ECU header or at the wire side of the loom; colours are for the documented loom and can differ in modified harnesses. B14 is marked not connected. Verify hardware, configuration and electrical limits against the source.
Connector A — 34-way
| Pin | Function | Loom colour in manual |
|---|---|---|
| 1 | Injector 4 | Brown/Orange |
| 2 | Injector 3 | Brown/Red |
| 3 | Injector 2 | Brown |
| 4 | Injector 1 | Brown/Black |
| 5 | +14 V | Red |
| 6 | +8 V | Red/White |
| 7 | Shield/Ground | Green |
| 8 | Trigger 1 | Black |
| 9 | Trigger 2 | Red |
| 10 | Ignition 4 | Blue/Orange |
| 11 | Ignition 3 | Blue/Red |
| 12 | Ignition 2 | Blue/Brown |
| 13 | Ignition 1 | Blue |
| 14 | Analogue voltage 4 | White/Black |
| 15 | Temperature 1 | Yellow |
| 16 | Temperature 2 | Yellow/Brown |
| 17 | Analogue voltage 1 | Yellow/Blue |
| 18 | Auxiliary 4 | Orange |
| 19 | Auxiliary 3 | Orange/Red |
| 20 | Auxiliary 2 | Orange/Brown |
| 21 | Auxiliary 1 | Orange/Black |
| 22 | Analogue voltage 2 | White/Brown |
| 23 | Digital input 3 | Grey/Red |
| 24 | Sensor ground | Green |
| 25 | Ground | Black |
| 26 | Auxiliary 8 | Orange/Purple |
| 27 | Auxiliary 7 | Orange/Blue |
| 28 | Auxiliary 6 | Orange/Green |
| 29 | Auxiliary 5 | Orange/Yellow |
| 30 | Digital input 1 | Grey/Black |
| 31 | Digital input 2 | Grey/Brown |
| 32 | +5 V | Red/Blue |
| 33 | Analogue voltage 3 | Yellow/Black |
| 34 | Ground | Black |
Connector B — 34-way
| Pin | Function | Loom colour in manual |
|---|---|---|
| 1 | Injector 8 | Brown/Purple |
| 2 | Injector 7 | Brown/Blue |
| 3 | Injector 6 | Brown/Green |
| 4 | Injector 5 | Brown/Yellow |
| 5 | +14 V Aux 9/10 | Red |
| 6 | Temperature 3 | Yellow/Red |
| 7 | Temperature 4 | Yellow/Orange |
| 8 | Knock 2 | Blue |
| 9 | Knock 1 | Blue |
| 10 | Ignition 8 | Blue/Purple |
| 11 | Ignition 7 | Blue/Black |
| 12 | Ignition 6 | Blue/Green |
| 13 | Ignition 5 | Blue/Yellow |
| 14 | Not connected | — |
| 15 | Analogue voltage 6 | White/Red |
| 16 | Analogue voltage 7 | White/Orange |
| 17 | Shield/Ground | Green |
| 18 | Auxiliary 9 | Purple |
| 19 | Digital input 6 | Grey/Green |
| 20 | Digital input 5 | Grey/Yellow |
| 21 | Digital input 4 | Grey/Orange |
| 22 | Sensor ground | Green |
| 23 | Analogue voltage 8 | White/Yellow |
| 24 | Analogue voltage 9 | White/Green |
| 25 | Ground | Black |
| 26 | Auxiliary 10 | Purple/White |
| 27 | Digital input 10 | Grey/Purple |
| 28 | Digital input 9 | Grey/White |
| 29 | Digital input 8 | Grey |
| 30 | Digital input 7 | Grey/Blue |
| 31 | Analogue voltage 10 | White/Blue |
| 32 | Analogue voltage 11 | White |
| 33 | Analogue voltage 5 | Yellow/Green |
| 34 | Ground | Black |
Communications connector
The separate six-way connector is shown on page 22 of the same manual.
| Pin | Colour | Function |
|---|---|---|
| 1 | Brown | Ground |
| 2 | Blue | N/A |
| 3 | White | CAN high |
| 4 | Green | CAN low |
| 5 | Yellow | ECU RS232 transmit |
| 6 | Grey | ECU RS232 receive |
Tuning and software
Link lists VTS software and compatibility details for V Series ECUs. Choose the software matching the ECU firmware and keep a copy of the calibration before making changes. Link Vi-PEC software archive.