Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
Vi-PEC V44 ECU
Vi-PEC V44 product image from Link Engine Management; reproduced with permission.

The Vi-PEC V44 is a V Series wire-in programmable engine-management ECU. Four injector and four ignition outputs, with an internal MAP sensor. Link's features table lists peak-and-hold drives while another hardware paragraph calls them optional; verify the exact V44 build and the manual before connecting low-impedance injectors. Link-hosted model information.

Wiring and pinout

The official V Series wiring and installation manual has the V44 header pinout, wiring diagrams and trigger sensor detail. Refer to the correct model and revision, as similar A-connector shells can have different functions, optional drivers and sensor circuitry.

Engine loom connector pinout

Transcribed from the Vi-PEC VX installation manual, pages 19. The connector view is looking into the ECU header or at the wire side of the loom; colours are for the documented loom and can differ in modified harnesses. Pin 22 can be used as analogue voltage 2 or digital input 4. Verify hardware, configuration and electrical limits against the source.

Connector A — 34-way

PinFunctionLoom colour in manual
1Injector 4Brown/Orange
2Injector 3Brown/Red
3Injector 2Brown
4Injector 1Brown/Black
5+14 VRed
6+8 VRed/White
7Shield/GroundGreen
8Trigger 1Black
9Trigger 2Red
10Ignition 4Blue/Orange
11Ignition 3Blue/Red
12Ignition 2Blue/Brown
13Ignition 1Blue
14Analogue voltage 4White/Black
15Temperature 1Yellow
16Temperature 2Yellow/Brown
17Analogue voltage 1Yellow/Blue
18Auxiliary 4Orange
19Auxiliary 3Orange/Red
20Auxiliary 2Orange/Brown
21Auxiliary 1Orange/Black
22Analogue voltage 2 or digital input 4White/Brown
23Digital input 3Grey/Red
24Sensor groundGreen
25GroundBlack
26Auxiliary 8Orange/Purple
27Auxiliary 7Orange/Blue
28Auxiliary 6Orange/Green
29Auxiliary 5Orange/Yellow
30Digital input 1Grey/Black
31Digital input 2Grey/Brown
32+5 VRed/Blue
33Analogue voltage 3Yellow/Black
34GroundBlack

Communications connector

The separate six-way connector is shown on page 22 of the same manual.

PinColourFunction
1BrownGround
2BlueN/A
3WhiteCAN high
4GreenCAN low
5YellowECU RS232 transmit
6GreyECU RS232 receive

Tuning and software

Link lists VTS software and compatibility details for V Series ECUs. Choose the software matching the ECU firmware and keep a copy of the calibration before making changes. Link Vi-PEC software archive.