Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
FuelTech standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
FuelTech FT600
FT600. Image: FuelTech media kit; editorial and web use permitted.

FuelTech FT600 is a PowerFT engine-management unit. PowerFT ECU with 20 configurable inputs and 32 outputs, including support for up to 16 injector channels as configured. It integrates a display and data logging. FuelTech model documentation · FuelTech range comparison.

Identification and software

Record the exact model, serial, harness, firmware and configured outputs; similarly named FT models may use different connectors and functions. Tuning software: FTManager. FuelTech software and compatibility.

Wiring and pinout

Use the model-specific manual and the current FuelTech manuals index for connector view, cavity numbering, fuse values, sensor grounds and injector-driver limits. The manufacturer wiring archive contains installation-specific examples; match the exact ECU and harness before wiring. Pin functions depend on the model, hardware and configured output.

See FuelTech engine-management family for other models and company background. FuelTech is based in Brazil and has a US operation in Georgia. Sources reviewed 17 November 2026.

FT600 ECU connector pin assignments

The FuelTech FT600 manual, sections 4.3 and 4.4, identifies two 34-way ECU connectors. The listed sensor and output functions are configurable; use the exact revision and check the connector view, driver ratings, protection and ground routing in the original. The magnetic trigger references are not generic Hall sensor grounds.

Connector A — 34 way

PinFunction and harness wire
1Blue output #1 (blue #1)
2Blue output #2 (blue #2)
3Blue output #3 (blue #3)
4Blue output #4 (blue #4)
5Blue output #5 (blue #5)
6Blue output #6 (blue #6)
7Blue output #7 (blue #7)
8Blue output #8 (blue #8)
9Blue output #9 (blue #9)
10Blue output #10 (blue #10)
11Blue output #11 (blue #11)
12Blue output #12 (blue #12)
13Blue output #13 (blue #13)
14Blue output #14 (blue #14)
15Blue output #15 (blue #15)
16Blue output #16 (blue #16)
17Power ground (black/white)
18Gray output #1 (gray #1)
19Gray output #2 (gray #2)
20Gray output #3 (gray #3)
21Gray output #4 (gray #4)
22Gray output #5 (gray #5)
23Gray output #6 (gray #6)
24Gray output #7 (gray #7)
25Gray output #8 (gray #8)
26Yellow output #1 (yellow #1)
27Yellow output #2 (yellow #2)
28Yellow output #3 (yellow #3)
29Yellow output #4 (yellow #4)
30Yellow output #5 (yellow #5)
31Yellow output #6 (yellow #6)
32Yellow output #7 (yellow #7)
33Yellow output #8 (yellow #8)
3412 V input from main relay (red)

Connector B — 34 way

PinFunction and harness wire
1RPM signal input (red)
2Magnetic RPM sensor reference (white)
3Cam sync signal input (red)
4Cam sync reference input (white)
5White input #1
6White input #2
7White input #3
8White input #4
9White input #5
10Battery negative (black)
11CAN A low (yellow/blue)
12CAN A high (white/red)
13White input #6
14White input #7
15White input #8
16White input #9
17White input #10
18Power ground (black/white)
19Power ground (black/white)
20CAN B high (white/red)
21White input #11
22White input #12
23White input #13
24White input #14
25White input #15
2612 V input from main relay (red)
275 V sensor supply (green/red)
28CAN B low (yellow/blue)
29Sensor ground (green/black)
30White input #16
31White input #17
32White input #18
33White input #19 / Power Shift positive
34White input #20 / Power Shift negative

Use the manual's power, grounding, relay and sensor instructions; power-ground and sensor-ground circuits have different functions. The optional Power Shift uses input channels 19 and 20 on this model.