
ECUMaster lists a Lotus 2ZR-FE EMU Black plug-in unit. ECUMaster USA describes its ECU as suitable for Elise 2ZR-FE 220, 250 and 260 Cup configurations and lists 2012–2021 Elise; confirm exact engine, body, original connector and regional variant with the supplier. Model source · ECUMaster plug-in catalogue.
Wiring and pinout
The manufacturer labels its diagram “2ZR extension wiring Pin out”; the following black and grey auxiliary connector positions do not represent the complete factory engine connector. See the diagram for connector orientation and full electrical context. Manufacturer model-specific document.
| Terminal | Manufacturer function |
|---|---|
| Black 1 | 5 V sensor reference |
| Black 2 | CAN switch board analogue 6 |
| Black 3 | CAN switch board analogue 7 |
| Black 4 | CAN switch board analogue 8 |
| Black 5 | Sensor ground |
| Black 6 | Wideband heater |
| Black 7 | Wideband Ip |
| Black 8 | Wideband Vs |
| Black 9 | Wideband Rcal |
| Black 10 | Wideband VGnd |
| Black 11 | Switched +12 V relay |
| Black 12 | Power ground |
| Grey 1 | CAN H |
| Grey 2 | CAN L |
| Grey 3 | RS232 TXD |
| Grey 4 | RS232 RXD |
| Grey 5 | Flex fuel input |
| Grey 6 | Sensor ground |
| Grey 7 | Analogue input 6 |
| Grey 8 | Analogue input 5 |
| Grey 9 | EGT 2 |
| Grey 10 | EGT 1 |
| Grey 11 | 5 V sensor reference |
| Grey 12 | Sensor ground |
These are both full extension connector tables from the model-specific document; they are not a full factory connector assignment.
Calibration and fitment checks
Record the engine code, ECU label and hardware, factory wiring and software version. The manufacturer provides software, available application notes and base maps; a base map is a starting point requiring checks of sensor readings, throttle operation, injector and ignition settings, trigger timing and engine calibration. Do not transfer universal EMU Black pin numbers or another plug-in's auxiliary connector assignments to this unit.
See the EMU Black model page and manufacturer index.