
MoTeC M141 is an M1-family programmable ECU, part 13141. The manufacturer identifies it for up to 8 cylinders and direct piezo injection. M1 hardware is paired with a software package; features, channels and licences depend on the loaded package and hardware revision. MoTeC M141 product information and product image.
Identification and inputs/outputs
| Field | Manufacturer comparison |
|---|---|
| Injection hardware | 8 direct piezo injector outputs; 6 low-side injector outputs |
| Ignition | 8 low-side ignition outputs |
| Half-bridge outputs | 10 |
| Universal digital inputs | 12 |
| Analogue voltage / temperature inputs | 17 / 6 |
| CAN buses | 3 |
| Connector configuration | four plastic, 120 positions |
Numbers describe hardware capacity; they do not establish simultaneous availability for a specific application. MoTeC’s M1 comparison distinguishes port, inductive direct and piezo direct drivers. Check the exact injector and package; an external driver is not interchangeable with an internal driver.
Wiring and pinout
Use the M141 connector pinout and datasheet on the manufacturer product page. Connector type, keying and positions vary across M1 models; do not copy pin functions from another ECU. Verify the hardware revision, package, output allocations, wiring orientation, electrical limits and power and earth provisions against the exact unit.
Manufacturer connector tables
These tables reproduce the complete connector position and designation lists from the MoTeC M141 datasheet. Pin identifiers are kept as printed, including letter case. Check the original connector views, mating key, wire size, electrical ratings and hardware revision before connecting. Output functions depend on the ECU package and configuration; direct-injection models require their specified drivers and precautions.
Connector A — 34 positions
| Pin | Designation | Function |
|---|---|---|
| A01 | AT5 | Analogue Temperature Input 5 |
| A02 | AT6 | Analogue Temperature Input 6 |
| A03 | AV15 | Analogue Voltage Input 15 |
| A04 | AV16 | Analogue Voltage Input 16 |
| A05 | AV17 | Analogue Voltage Input 17 |
| A06 | INJ_D1A_NEG | Direct Injector 1A - |
| A07 | INJ_D1A_POS | Direct Injector 1A + |
| A08 | INJ_D1B_POS | Direct Injector 1B + |
| A09 | INJ_D1B_NEG | Direct Injector 1B - |
| A10 | SEN_5V0_C1 | Sensor 5.0V C |
| A11 | LA_NB1 | Lambda Narrow Input 1 |
| A12 | LA_NB2 | Lambda Narrow Input 2 |
| A13 | KNOCK3 | Knock Input 3 |
| A14 | KNOCK4 | Knock Input 4 |
| A15 | DIG2 | Digital Input 2 |
| A16 | DIG3 | Digital Input 3 |
| A17 | DIG4 | Digital Input 4 |
| A18 | SEN_5V0_C2 | Sensor 5.0V C |
| A19 | SEN_5V0_B2 | Sensor 5.0V B |
| A20 | LIN | LIN Bus |
| A21 | RS232_RX | RS232 Receive |
| A22 | RS232_TX | RS232 Transmit |
| A23 | DIG1 | Digital Input 1 |
| A24 | BAT_NEG3 | Battery Negative |
| A25 | BAT_NEG4 | Battery Negative |
| A26 | SEN_0V_C1 | Sensor 0V C |
| A27 | SEN_0V_C2 | Sensor 0V C |
| A28 | CAN3_HI | CAN Bus 3 High |
| A29 | CAN3_LO | CAN Bus 3 Low |
| A30 | CAN2_HI | CAN Bus 2 High |
| A31 | CAN2_LO | CAN Bus 2 Low |
| A32 | BAT_NEG5 | Battery Negative |
| A33 | SEN_0V_B1 | Sensor 0V B |
| A34 | SEN_0V_A1 | Sensor 0V A |
Connector B — 26 positions
| Pin | Designation | Function |
|---|---|---|
| B01 | OUT_HB9 | Half Bridge Output 9 |
| B02 | OUT_HB10 | Half Bridge Output 10 |
| B03 | UDIG8 | Universal Digital Input 8 |
| B04 | UDIG9 | Universal Digital Input 9 |
| B05 | UDIG10 | Universal Digital Input 10 |
| B06 | UDIG11 | Universal Digital Input 11 |
| B07 | UDIG12 | Universal Digital Input 12 |
| B08 | INJ_LS5 | Low Side Injector 5 |
| B09 | INJ_LS3 | Low Side Injector 3 |
| B10 | AV9 | Analogue Voltage Input 9 |
| B11 | AV10 | Analogue Voltage Input 10 |
| B12 | AV11 | Analogue Voltage Input 11 |
| B13 | BAT_POS | Battery Positive |
| B14 | INJ_LS6 | Low Side Injector 6 |
| B15 | INJ_LS4 | Low Side Injector 4 |
| B16 | AV12 | Analogue Voltage Input 12 |
| B17 | AV13 | Analogue Voltage Input 13 |
| B18 | AV14 | Analogue Voltage Input 14 |
| B19 | BAT_POS | Battery Positive |
| B20 | OUT_HB7 | Half Bridge Output 7 |
| B21 | OUT_HB8 | Half Bridge Output 8 |
| B22 | INJ_D2A_NEG | Direct Injector 2A - |
| B23 | INJ_D2A_POS | Direct Injector 2A + |
| B24 | INJ_D2B_POS | Direct Injector 2B + |
| B25 | INJ_D2B_NEG | Direct Injector 2B - |
| B26 | SEN_5V0_A | Sensor 5.0V A |
Connector C — 34 positions
| Pin | Designation | Function |
|---|---|---|
| C01 | OUT_HB2 | Half Bridge Output 2 |
| C02 | SEN_5V0_A | Sensor 5.0V A |
| C03 | IGN_LS1 | Low Side Ignition 1 |
| C04 | IGN_LS2 | Low Side Ignition 2 |
| C05 | IGN_LS3 | Low Side Ignition 3 |
| C06 | IGN_LS4 | Low Side Ignition 4 |
| C07 | IGN_LS5 | Low Side Ignition 5 |
| C08 | IGN_LS6 | Low Side Ignition 6 |
| C09 | SEN_5V0_B | Sensor 5.0V B |
| C10 | BAT_NEG1 | Battery Negative |
| C11 | BAT_NEG2 | Battery Negative |
| C12 | IGN_LS7 | Low Side Ignition 7 |
| C13 | IGN_LS8 | Low Side Ignition 8 |
| C14 | AV1 | Analogue Voltage Input 1 |
| C15 | AV2 | Analogue Voltage Input 2 |
| C16 | AV3 | Analogue Voltage Input 3 |
| C17 | AV4 | Analogue Voltage Input 4 |
| C18 | OUT_HB1 | Half Bridge Output 1 |
| C19 | INJ_D3A_POS | Direct Injector 3A + |
| C20 | INJ_D3B_POS | Direct Injector 3B + |
| C21 | INJ_D4A_POS | Direct Injector 4A + |
| C22 | INJ_D4B_POS | Direct Injector 4B + |
| C23 | INJ_LS1 | Low Side Injector 1 |
| C24 | INJ_LS2 | Low Side Injector 2 |
| C25 | AV5 | Analogue Voltage Input 5 |
| C26 | BAT_POS | Battery Positive |
| C27 | INJ_D3A_NEG | Direct Injector 3A - |
| C28 | INJ_D3B_NEG | Direct Injector 3B - |
| C29 | INJ_D4A_NEG | Direct Injector 4A - |
| C30 | INJ_D4B_NEG | Direct Injector 4B - |
| C31 | OUT_HB3 | Half Bridge Output 3 |
| C32 | OUT_HB4 | Half Bridge Output 4 |
| C33 | OUT_HB5 | Half Bridge Output 5 |
| C34 | OUT_HB6 | Half Bridge Output 6 |
Connector D — 26 positions
| Pin | Designation | Function |
|---|---|---|
| D01 | UDIG1 | Universal Digital Input 1 |
| D02 | UDIG2 | Universal Digital Input 2 |
| D03 | AT1 | Analogue Temperature Input 1 |
| D04 | AT2 | Analogue Temperature Input 2 |
| D05 | AT3 | Analogue Temperature Input 3 |
| D06 | AT4 | Analogue Temperature Input 4 |
| D07 | KNOCK1 | Knock Input 1 |
| D08 | UDIG3 | Universal Digital Input 3 |
| D09 | UDIG4 | Universal Digital Input 4 |
| D10 | UDIG5 | Universal Digital Input 5 |
| D11 | UDIG6 | Universal Digital Input 6 |
| D12 | BAT_BAK | Battery Backup |
| D13 | KNOCK2 | Knock Input 2 |
| D14 | UDIG7 | Universal Digital Input 7 |
| D15 | SEN_0V_A | Sensor 0V A |
| D16 | SEN_0V_B | Sensor 0V B |
| D17 | CAN1_HI | CAN Bus 1 High |
| D18 | CAN1_LO | CAN Bus 1 Low |
| D19 | SEN_6V3 | Sensor 6.3V |
| D20 | AV6 | Analogue Voltage Input 6 |
| D21 | AV7 | Analogue Voltage Input 7 |
| D22 | AV8 | Analogue Voltage Input 8 |
| D23 | ETH_TX+ | Ethernet Transmit+ |
| D24 | ETH_TX- | Ethernet Transmit- |
| D25 | ETH_RX+ | Ethernet Receive+ |
| D26 | ETH_RX- | Ethernet Receive- |
Software and context
M1 Tune configures supported packages, while M1 Build is used to develop packages. ECU and logging features depend on installed licences. MoTeC downloads; MoTeC model index.