Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Syvecs Standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

Syvecs S-GDI4 standalone ECU shown as a family illustration. This vehicle-specific kit and its adapter or wiring are not pictured and may differ. Image: Syvecs, reproduced with permission.

Product and application

Syvecs lists the Ford Focus ST Mk3 2011-2015 SGDI vehicle-specific standalone ECU kit with manufacturer code SGDI-FFST. The manufacturer identifies the Focus ST Mk3, 2011–2015, as the intended application. The SGDI kit is a dedicated vehicle replacement; confirm the engine and ECU connector for the car's market.

A vehicle kit may include a particular carrier board, adaptor loom or auxiliary modules in addition to the ECU. Confirm the exact package, part number, engine, market and installation requirements with the manufacturer before installation.

Wiring and pinout status

A matching pinout has not been verified for this specific kit. Ask Syvecs or its authorised supplier for the exact application and harness-revision wiring guide before connecting the ECU. The manufacturer's plug-in manual index is a starting point, but a document for a similarly named vehicle is not proof that its pins match this kit.

Calibration and support

Syvecs provides SCal software and family firmware, but an application-specific base calibration and correct hardware configuration are needed for the actual engine. Any features depend on ECU hardware, sensors, firmware and calibration. Review the manufacturer software portal and firmware archive.

Sources

Syvecs Ford Focus ST Mk3 2011-2015 SGDI product listing and applicationSyvecs vehicle-specific manual index

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Syvecs Ford Focus ST Mk3 2011-2015 SGDI Plug-in ECU

Product and application

Syvecs lists the Ford Focus ST Mk3 2011-2015 SGDI vehicle-specific standalone ECU kit with manufacturer code SGDI-FFST. The manufacturer identifies the Focus ST Mk3, 2011–2015, as the intended application. The SGDI kit is a dedicated vehicle replacement; confirm the engine and ECU connector for the car's market.

A vehicle kit may include a particular carrier board, adaptor loom or auxiliary modules in addition to the ECU. Confirm the exact package, part number, engine, market and installation requirements with the manufacturer before installation.

Wiring and pinout status

A matching pinout has not been verified for this specific kit. Ask Syvecs or its authorised supplier for the exact application and harness-revision wiring guide before connecting the ECU. The manufacturer's plug-in manual index is a starting point, but a document for a similarly named vehicle is not proof that its pins match this kit.

Calibration and support

Syvecs provides SCal software and family firmware, but an application-specific base calibration and correct hardware configuration are needed for the actual engine. Any features depend on ECU hardware, sensors, firmware and calibration. Review the manufacturer software portal and firmware archive.

Sources

Revision 2: Syvecs Ford Focus ST Mk3 2011-2015 SGDI Plug-in ECU
Syvecs S-GDI4 standalone ECU
Syvecs S-GDI4 standalone ECU shown as a family illustration. This vehicle-specific kit and its adapter or wiring are not pictured and may differ. Image: Syvecs, reproduced with permission.

Product and application

Syvecs lists the Ford Focus ST Mk3 2011-2015 SGDI vehicle-specific standalone ECU kit with manufacturer code SGDI-FFST. The manufacturer identifies the Focus ST Mk3, 2011–2015, as the intended application. The SGDI kit is a dedicated vehicle replacement; confirm the engine and ECU connector for the car's market.

A vehicle kit may include a particular carrier board, adaptor loom or auxiliary modules in addition to the ECU. Confirm the exact package, part number, engine, market and installation requirements with the manufacturer before installation.

Wiring and pinout status

A matching pinout has not been verified for this specific kit. Ask Syvecs or its authorised supplier for the exact application and harness-revision wiring guide before connecting the ECU. The manufacturer's plug-in manual index is a starting point, but a document for a similarly named vehicle is not proof that its pins match this kit.

Calibration and support

Syvecs provides SCal software and family firmware, but an application-specific base calibration and correct hardware configuration are needed for the actual engine. Any features depend on ECU hardware, sensors, firmware and calibration. Review the manufacturer software portal and firmware archive.

Sources