Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 3

Removed text is struck through; added text is highlighted.

Vi-PEC iTT plug-in ECU. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC iTT is a iSeries plug-in ECU documented for Audi TT, Volkswagen Beetle, Golf and Passat 1.8T electronic-throttle applications listed by Link; model years differ by vehicle. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named iSeries plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link identifies PCLink G4+ for iSeries hardware. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer main-connector pinoutAll positions listed in the i-Series application installation guide, page 20. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The pinout is specifically labelled VW/Audi 1.8T V1.3. The guide identifies the internal MAP sensor as An Volt 1 and says spare I/O uses the main header. Confirm hardware revision and exact vehicle.PositionECU function5Inj 588Inj 427Sensor GND89Inj 229An Volt 292An Volt 334An Volt 693An Temp 135An Volt 594Ign 437Aux 195Ign 239DI 496Inj 140DI 697Inj 341DI 798+ 5 volt out48Aux 7101An Volt 749DI 5102Ign 154DI 1103Ign 355DI 2104Aux 356DI 3105Aux 258CAN Low106Knock 160CAN High107Knock 263Inj 7110An Temp 364Aux 6111An Volt 1065Aux 5112DI 967DI 8113Ign 669An Volt 9115Inj 670An Volt 8117Aux 982Trig 1118Aux 1084An Volt 485An Temp 286Trig 2

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Vi-PEC iTT

Vi-PEC iTT is a iSeries plug-in ECU documented for Audi TT, Volkswagen Beetle, Golf and Passat 1.8T electronic-throttle applications listed by Link; model years differ by vehicle. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named iSeries plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link identifies PCLink G4+ for iSeries hardware. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Revision 3: Vi-PEC iTT
Vi-PEC iTT plug-in ECU
Vi-PEC iTT plug-in ECU. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC iTT is a iSeries plug-in ECU documented for Audi TT, Volkswagen Beetle, Golf and Passat 1.8T electronic-throttle applications listed by Link; model years differ by vehicle. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named iSeries plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link identifies PCLink G4+ for iSeries hardware. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer main-connector pinout

All positions listed in the i-Series application installation guide, page 20. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The pinout is specifically labelled VW/Audi 1.8T V1.3. The guide identifies the internal MAP sensor as An Volt 1 and says spare I/O uses the main header. Confirm hardware revision and exact vehicle.

PositionECU function
5Inj 5
88Inj 4
27Sensor GND
89Inj 2
29An Volt 2
92An Volt 3
34An Volt 6
93An Temp 1
35An Volt 5
94Ign 4
37Aux 1
95Ign 2
39DI 4
96Inj 1
40DI 6
97Inj 3
41DI 7
98+ 5 volt out
48Aux 7
101An Volt 7
49DI 5
102Ign 1
54DI 1
103Ign 3
55DI 2
104Aux 3
56DI 3
105Aux 2
58CAN Low
106Knock 1
60CAN High
107Knock 2
63Inj 7
110An Temp 3
64Aux 6
111An Volt 10
65Aux 5
112DI 9
67DI 8
113Ign 6
69An Volt 9
115Inj 6
70An Volt 8
117Aux 9
82Trig 1
118Aux 10
84An Volt 4
85An Temp 2
86Trig 2