Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 3

Removed text is struck through; added text is highlighted.

Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series BMW E36 M50TUB25 is a V Series plug-in ECU documented for BMW E36 M50TUB25. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tablesAll positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide identifies the BMW M50TUB25 application. Pin 69, 70 is listed together for knock; confirm the specific loom.Main ECU connector: documented positionsPositionECU function1Aux 82Aux 13Inj 54Inj 65Inj 47Aux 38Aux 611Aux 713An Volt 316Trig 117Trig 223Ign 424Ign 625Ign 529Aux 231Inj 332Inj 233Inj 134Gnd36Ign 8 (Aux)41AnVolt 642DI 146Aux 447Aux 548Ign 7 (Aux)50Ign 151Ign 252Ign 354+14V57DI 459+5V64DI 365DI 269, 70Knock73AnVolt 277AnTemp 278AnTemp 181DI 5Other connectionsPositionECU functionInternal MAP SensorAnVolt 1Expansion 1GndExpansion 2+5VExpansion 3DI 7Expansion 4DI 8Expansion 5AnVolt 5Expansion 6AnVolt 4Expansion 7AnTemp 4Expansion 8AnTemp 3

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Vi-PEC V Series BMW E36 M50TUB25

Vi-PEC V Series BMW E36 M50TUB25 is a V Series plug-in ECU documented for BMW E36 M50TUB25. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Revision 3: Vi-PEC V Series BMW E36 M50TUB25
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series BMW E36 M50TUB25 is a V Series plug-in ECU documented for BMW E36 M50TUB25. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

All positions listed in the application-specific Vi-PEC installation guide, page 21, appear below. The guide specifies the view looking into the ECU from the wire side. It does not list every factory connector cavity; omitted positions are not assumed unused. The guide identifies the BMW M50TUB25 application. Pin 69, 70 is listed together for knock; confirm the specific loom.

Main ECU connector: documented positions

PositionECU function
1Aux 8
2Aux 1
3Inj 5
4Inj 6
5Inj 4
7Aux 3
8Aux 6
11Aux 7
13An Volt 3
16Trig 1
17Trig 2
23Ign 4
24Ign 6
25Ign 5
29Aux 2
31Inj 3
32Inj 2
33Inj 1
34Gnd
36Ign 8 (Aux)
41AnVolt 6
42DI 1
46Aux 4
47Aux 5
48Ign 7 (Aux)
50Ign 1
51Ign 2
52Ign 3
54+14V
57DI 4
59+5V
64DI 3
65DI 2
69, 70Knock
73AnVolt 2
77AnTemp 2
78AnTemp 1
81DI 5

Other connections

PositionECU function
Internal MAP SensorAnVolt 1
Expansion 1Gnd
Expansion 2+5V
Expansion 3DI 7
Expansion 4DI 8
Expansion 5AnVolt 5
Expansion 6AnVolt 4
Expansion 7AnTemp 4
Expansion 8AnTemp 3