Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Vi-PEC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
Vi-PEC i88 ECU
Vi-PEC i88 product image from Link Engine Management; reproduced with permission.

The Vi-PEC i88 is a iSeries wire-in programmable engine-management ECU. 8 injector and 8 ignition outputs; the iSeries manual describes an A and B connector, peak-and-hold injector drives and an external MAP sensor. Link’s archived page describes electronic throttle, two-sensor knock control and variable camshaft control. Link-hosted model information.

Wiring and pinout

The official iSeries wiring and installation manual has the i88 header pinout, wiring diagrams and trigger sensor detail. Refer to the correct model and revision, as similar A-connector shells can have different functions, optional drivers and sensor circuitry.

Communications connector

The six-way communications connector is separate from the engine loom connectors. iSeries installation manual; confirm orientation in the diagram.

PinWireFunction
1BrownGround
2BlueNot connected
3WhiteCAN high
4GreenCAN low
5YellowECU RS232 transmit
6GreyECU RS232 receive

Tuning and software

Link identifies PCLink for G4+ as compatible with iSeries ECUs. Choose the software matching the ECU firmware and keep a copy of the calibration before making changes. Link Vi-PEC software archive.