Model and vehicle application
Syvecs lists this vehicle-specific standalone or plug-in ECU kit as Audi RS3 8Y1 Pre Facelift S7D, with product code S7D-RS38Y!YDF. The product page and its stated vehicle, model and transmission details define this particular application; confirm market, model year, engine, ECU connector and transmission against Syvecs before ordering.
This entry describes the dedicated vehicle kit. It is distinct from the generic wire-in ECU: a plug-in kit can use application-specific adaptor wiring, a carrier, additional modules and an application calibration. The listed hardware or supported equipment can vary by revision.
The manufacturer product page displays the code S7D-RS38Y!YDF, including an exclamation mark. Treat this transcription as uncertain and confirm the part number with Syvecs before ordering.
Wiring and pinout
Syvecs Audi RS3 8Y1 Pre Facelift S7D installation and wiring document. Follow the connector orientation, application-specific tables, installation notes and hardware revision in this document. Do not transfer assignments from another vehicle merely because the underlying ECU family is similar. The link was checked to return a PDF.
For other variants and manual revisions consult the manufacturer's vehicle-specific manual index. Available spare inputs and outputs can be used only within their electrical limits and with a matching calibration.
Calibration and service
Use the correct Syvecs software, firmware and base calibration for the exact vehicle and installed hardware. The Syvecs software portal and firmware archive provide manufacturer support. A base map is a starting point and needs checking against the actual engine, injectors, sensors and modifications.