The 9A6 is a direct-injection ECU for four-cylinder engines; SBD developed its documented application for the Ford 1.6-litre EcoBoost. SBD also identifies twin CAN buses and wideband inputs. Direct-injector and throttle control depend on exact application and configuration. Source and identification.
Wiring and pinout
Model wiring documentation: 9A6 pinout issue F, not the 9A9 connector assignment. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.
Configuration and support
For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.
Evidence limits
Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.