The MBE 967i is an older ignition-oriented controller with its own wiring instructions. SBD archives separate standard and D-driven installation sheets; confirm the ignition drive variant before using them. Source and identification.
Wiring and pinout
Model wiring documentation: 967i series wiring instruction; the archive separately lists a D-driven version. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.
Configuration and support
For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.
Evidence limits
Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.