The 9A9 is an MBE fuel-injection ECU for up to eight cylinders. SBD describes twin wideband lambda inputs and two CAN buses; pinout, sensor and driver suitability depends on the exact hardware and software. Source and identification.
Wiring and pinout
Model wiring documentation: Issue N2, BOM1-010 onward only; obtain the matching diagram for other builds. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.
Configuration and support
For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.
Evidence limits
Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.