The 9A8 is an earlier CAN-based MBE ECU. SBD supplies its issue F pinout and lists that diagram on its 9M8 eight-cylinder ECU product page. The 9A8 uses one CAN bus under SBD’s CAN setup guide. Source and identification.
Wiring and pinout
Model wiring documentation: 9A8 issue F. Check connector view, wiring harness, ECU part number and installed calibration before connecting power. Programmable input and output functions depend on the map and software.
Configuration and support
For programmable SBD-supplied ECUs, Easimap is used to inspect and change maps, subject to the interface and access of the actual ECU. Some vehicle-manufacturer supplied units are locked; SBD’s FAQ warns against attempting downloads to locked ECUs. Do not assume that a serial ECU map or harness transfers directly to a newer CAN unit.
Evidence limits
Verify the build, trigger inputs, coil-driver type and software with the supplier. Not all historic variants and pin assignments are documented here.