Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Speeduino standalone ECUs
Applies to
Speeduino standalone ECUs
Tool groups
None
Manufacturers
None

NO2C (No Overhang Two Channel) is an independently designed WTMtronics board using Speeduino firmware, not an official Speeduino project board. The designer documents two injector channels, two ignitor channels, VVT, PWM idle, boost, fuel-pump and tachometer outputs, two triggers, launch, CLT, IAT, TPS and O2 inputs, MAP and a socket for a stepper-idle module.

Versions and wiring

The designer’s NO2C revision files and project-hosted NO2C revision guide distinguish v0.1.x, v0.2.x, C1 and D1. The guide notes different connector families between v0.1 and v0.2. Obtain the schematic for the physical revision; do not substitute the 40-way v0.4 pinout. A board layout setting and firmware version must also match.