Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Speeduino standalone ECUs
Applies to
Speeduino standalone ECUs
Tool groups
None
Manufacturers
None

Ocelot is an independently designed WTMtronics Speeduino-compatible board following UA4C, with an integrated microcontroller and automotive connector. The designer also lists a vehicle-speed input, flyback diodes and reset button. Its project notes distinguish it from a UA4C using a separate Arduino.

Revision and connections

Use the Ocelot designer documentation and schematic directory for the exact board. The designer’s overview and errata reports that revision A3 primary and secondary trigger jumper labels are reversed. Confirm the actual board and firmware rather than using a UA4C or v0.4 connector diagram.