Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
GEMS Performance Electronics standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

GEMS EM40: A historical GEMS engine-management identity discussed in the manufacturer's forum. Manufacturer source.

Hardware and control

The forum discussion compares EM40 and EM36 for a particular aspect-file context. It does not establish universal pinout or configuration equivalence; verify actual hardware, software and installation documentation. GEMS model information.

GEMS systems use GWv4 configuration, with the required ECU definition and licence; software options and custom builds can differ. Record the label, hardware and firmware and confirm connected devices against the matching documentation. GWv4 manual.

Connector and wiring

A verified complete model-specific connector pinout was not identified in the reviewed public material. Obtain the specific drawing and build information from GEMS; do not assume the wiring of a similarly named controller.

Further references

Sources reviewed 17 November 2026.