Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
GEMS Performance Electronics standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

GEMS X25: A historical GEMS ECU identity mentioned in the manufacturer's technical forum. Manufacturer source.

Hardware and control

A GEMS discussion distinguishes X25 sensor raw values from the EM36/EM40 context. It does not provide a complete X25 connector pinout or establish compatibility with other GEMS units. GEMS model information.

GEMS systems use GWv4 configuration, with the required ECU definition and licence; software options and custom builds can differ. Record the label, hardware and firmware and confirm connected devices against the matching documentation. GWv4 manual.

Connector and wiring

A verified complete model-specific connector pinout was not identified in the reviewed public material. Obtain the specific drawing and build information from GEMS; do not assume the wiring of a similarly named controller.

Further references

Sources reviewed 17 November 2026.