
GEMS EM112: An eight-cylinder engine-management system with dual wideband lambda, eight coil drivers, eight programmable peak-and-hold injector drivers, three CAN buses and 256 MB internal logging. Manufacturer source.
Hardware and control
GEMS lists 20 analogue inputs, two differential analogue inputs, twelve timing inputs, two knock inputs and a 112-position Molex connector. It supports electronic throttle, variable cam timing and gearshift control, subject to ECU configuration. GEMS model information.
GEMS systems use GWv4 configuration, with the required ECU definition and licence; software options and custom builds can differ. Record the label, hardware and firmware and confirm connected devices against the matching documentation. GWv4 manual.
Connector and pinout
The EM112 technical specification, 103715 rev 11 includes model-specific connector and pinout drawings. Establish connector view, hardware revision and current limits in that document. The EM112 datasheet's connector C ignition driver names and software codes are internally inconsistent at some positions. Do not resolve them by assumption; obtain a confirmed drawing for the actual build from GEMS before connecting ignition.
Further references
- GEMS EM112 manufacturer source
- Model-specific technical and wiring specification
- GEMS software and downloads
- GEMS manufacturer overview
Sources reviewed 17 November 2026.