Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Speeduino standalone ECUs
Applies to
Speeduino standalone ECUs
Tool groups
None
Manufacturers
None

The second shield develops the v0.1. Its documented design features include four high-impedance injector channels, four ignition outputs for igniters or logic-level coils, coolant, air-temperature, oxygen and throttle inputs, optional MAP sensor and speed-sensing inputs. The historical document records a testing status in September 2014; this is not a statement of present availability.

Connections and setup

The v0.2 project description, layout and jumper setup describes screw-terminal I/O and an optional VR conditioner. JP1 selects 5 V or 12 V logic output; neither setting permits direct high-current coil drive.

Confirm exact assembled revision, modifications, controller and firmware before wiring. Sensor conditioning and compatible drivers matter; see project hardware requirements.