Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MoTeC standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
MoTeC M170 ECU
MoTeC M170 product image from the manufacturer datasheet; reproduced with permission.

MoTeC M170 is an M1-family programmable ECU, part 13170. The manufacturer identifies it for up to 8 cylinders and port injection. M1 hardware is paired with a software package; features, channels and licences depend on the loaded package and hardware revision. MoTeC M170 product information and product image.

Identification and inputs/outputs

FieldManufacturer comparison
Injection hardware8 port injector outputs; 2 low-side injector outputs
Ignition8 low-side ignition outputs
Half-bridge outputs6
Universal digital inputs8
Analogue voltage / temperature inputs8 / 4
CAN buses1
Connector configurationone Autosport, 66 positions

Numbers describe hardware capacity; they do not establish simultaneous availability for a specific application. MoTeC’s M1 comparison distinguishes port, inductive direct and piezo direct drivers. Check the exact injector and package; an external driver is not interchangeable with an internal driver.

Wiring and pinout

Use the M170 connector pinout and datasheet on the manufacturer product page. Connector type, keying and positions vary across M1 models; do not copy pin functions from another ECU. Verify the hardware revision, package, output allocations, wiring orientation, electrical limits and power and earth provisions against the exact unit.

Software and context

M1 Tune configures supported packages, while M1 Build is used to develop packages. ECU and logging features depend on installed licences. MoTeC downloads; MoTeC model index.